1.2.8 issue - Colour wheel "index out of range" about home-assistant-tapo-p100 HOT 9 CLOSED

Tomorrow, I'll change logging level, and install 1.2.8 again and output those details for you :)

from home-assistant-tapo-p100.

Initial testing shows everything is working great :) thanks you’re legend

from home-assistant-tapo-p100.

Try with new 1.2.9 :)

L530 works fine now. You are great!

from home-assistant-tapo-p100.

Same issue here on L530, temperature works fine, but color change fails

from home-assistant-tapo-p100.

Can you check if in the log before the error are there strings like Setting brightness...? If there can you post the full log?

from home-assistant-tapo-p100.

Here you go: https://pastebin.com/18ZRxFzj

Hope fully something in there helps :)

from home-assistant-tapo-p100.

hello,
I found out that the bulb is HW version 1 and 2.
-at 1.2.8 the colors do not work for HW version 1, for HW version 2 colors work

HW version1:
1.2.7 only colors work, temperature is not displayed
1.2.8 temperature works but colors write out of range

from home-assistant-tapo-p100.

hello, I found out that the bulb is HW version 1 and 2. -at 1.2.8 the colors do not work for HW version 1, for HW version 2 colors work

HW version1: 1.2.7 only colors work, temperature is not displayed 1.2.8 temperature works but colors write out of range

Thanks, so probably there is some regression after fixing bulb with hw2. I will fix asap

from home-assistant-tapo-p100.

Try with new 1.2.9 :)

from home-assistant-tapo-p100.