Incorrect information about attachSystemInterrupt for Boron about docs HOT 3 OPEN

Yes. The documentation for the Boron section of DeviceOS includes that block, which is wrong.

That system interrupt block also works for none of the four timers on the boron. From what I can see in the DeviceOS code, it is not implemented.

from docs.

@AndrewMoscoe, the Gen3 devices only have four usable timers:

0: Softdevice - do not use
1: Radio - Used by BLE (and mesh)
2: Usart (Serial1) Can use if not using Serial1.
3: Usart (Serial2 on Xenon) Cannot be used on Argon or Boron because it’s required by NCP.
4: NFC - recommended (unless you need NFC).

from docs.

@rickkas7, Gen3 devices do not have the same interrupt designations for timers nor do they have a timer5. The examples given for attachSystemInterrupt() and attachInterruptDirect() for Gen3 devices incorrectly refer to Gen2 interrupts and timers. There needs to be Gen3-specific examples.

from docs.