iPhone X ( ios 16.7.8 ) rootful jailbreak is not working. about palera1n HOT 21 OPEN

Sileo doesn't give good error messages when it comes to this, so I would prefer you use a command line and see what actually is going on.

sudo dpkg -a --configure
sudo apt install -f

Possibly? When SSH'd into the iPhone.

Do i have to use these codes on ssh? I can try tomorrow And, do you think if palera1n would release a new version to fix this? And yes, how often does he/she release new updates?

Assumably, yes since you can't install tweaks you will have to use ssh. Also as far as I know, there is a refactor of palera1n arriving at a certain point.

from palera1n.

Unlikely that palera1n may be able to fix this as this issue is also a known issue with checkra1n, maybe if we knew the exact cause of it (which we do not) then there's no chance at this very point.

Though, this issue is very rare and only has happened to a handful of people in some occasions.

from palera1n.

Rootful has some issue (You must use only Ellekit currently, bcz Substitute was deleted by repo maintainer)

We deleted substitute because we thought ellekit would be a good replacement for it, but I'm not sure if theres actually any real issues as it works fine with rootless already.

If you can report a real issue thats been happening (thats not a user issue) then it would be greatly appreciated.

from palera1n.

Nothing problem with Frida on Substitute.

I see, I can possibly add substitute back if this can satisfy those people that use frida, I have no problem with that

But preferably I would want ellekit to take priority over substitute if possible for new users

from palera1n.

Also, please dont tell me to use it rootless. Its not working for me. I need rootful for my apps.

from palera1n.

According to reports apparently rootful is broken on iOS 16 with palera1n beta 9~: #417 (comment)

I've tried to use the prior version of Palera1n. I can successfully create FakeFS, but when the phone boots with Palera1n, I have no Wi-Fi connection.

This can be fixed with a few simple commands actually (this is also an issue with other tools such as checkra1n), which can be fixed with a simple userspace reboot after booting jailbroken on an older version

from palera1n.

Can you say which pc OS you have?

from palera1n.

Can you say which pc OS you have?

Hello, Thank you for reply.
I've used My windows PC to jailbreak my iphone via usb. (64bit)
I also own a Macbook M3, I've installed palera1n via terminal, but couldnt understand how to use it.
Also,
I've already readen comments on the ticket you've mentioned. But i also dont understand how to use these commands on Windows, They look like Linux terminal codes.

from palera1n.

I assume palen1x correct for the windows computer? It would be an ISO file you boot into

from palera1n.

I assume palen1x correct for the windows computer?

Yes I do have the correct palen1x, also i've tried recent version but it didnt work well. So I've used version before than the recent one. It did work but not working good.

from palera1n.

from palera1n.

Yes I do have the correct palen1x, also i've tried recent version but it didnt work well. So I've used version before than the recent one. It did work but not working good.

Palen1x should have a feature to 'SSH' on the main menu

user:      root
port:      22
password:  alpine

After you get into the phone (while jailbroken with an older version), you would need to type launchctl reboot userspace

This would presumably fix any 'wifi not being able to connect or disabled' issues that exist from what I remember, I've had myself similar issues in the past when it comes to checkm8 jailbreaks

from palera1n.

Yes I do have the correct palen1x, also i've tried recent version but it didnt work well. So I've used version before than the recent one. It did work but not working good.

Palen1x should have a feature to 'SSH' on the main menu

user:      root
port:      22
password:  alpine

After you get into the phone (while jailbroken with an older version), you would need to type launchctl reboot userspace

Hey, so I've just erased my iphone again and its clean right now. But i must to work tonight and tomorrow night, Im uber driver. So i can test this on Sunday or early tomorrow.
If i understood correctly:
1- I must to jailbreak my iphone with older palera1n, and when its jailbroken. I will open SSH from palera1n (i've seen it before)
and then input "launchctl reboot userspace" So this will be my solution for wifi, but yesterday i've sent my crash error file to discord and they've said its of because my gps app. Can you please also check it for me ?
I cant upload it here so:
https://cdn.discordapp.com/attachments/688122301975363591/1245905124941893632/panic-full-2024-05-31-025758.000.ips?ex=665b1bd1&is=6659ca51&hm=d95996fd16956b19cbfeac40d1b5c430a59b1777fa27a2cb265715abe48e398b&

Also i couldnt install my apps because there were dependencies errors, even if i installed the needed ones. i couldnt install them because of error. here are :

from palera1n.

Sileo doesn't give good error messages when it comes to this, so I would prefer you use a command line and see what actually is going on.

sudo dpkg -a --configure
sudo apt install -f

Possibly? When SSH'd into the iPhone.

from palera1n.

Sileo doesn't give good error messages when it comes to this, so I would prefer you use a command line and see what actually is going on.

sudo dpkg -a --configure
sudo apt install -f

Possibly? When SSH'd into the iPhone.

Do i have to use these codes on ssh? I can try tomorrow
And, do you think if palera1n would release a new version to fix this? And yes, how often does he/she release new updates?

from palera1n.

You can jailbreak rootful mode using palera1n v2.0.0 beta 7

• https://github.com/palera1n/palera1n/releases/tag/v2.0.0-beta.7

Please don't use from v2.0.0 beta 8: Dusk version (Not working)

Rootful has some issue (You must use only Ellekit currently, bcz Substitute was deleted by repo maintainer)

from palera1n.

Please don't use from v2.0.0 beta 8: Dusk version (Not working)

Can you report whats specifically not working..?

from palera1n.

Please don't use from v2.0.0 beta 8: Dusk version (Not working)

Can you report whats specifically not working..?

Substitute has no issues with Frida, but Ellekit has a issue with Frida. (Rootful mode)

An App on my iPhone 8 Plus (iOS 16.7.8) may been crashed by Ellekit. (imo)

Nothing problem with Frida on Substitute.

from palera1n.

You can jailbreak rootful mode using palera1n v2.0.0 beta 7

• https://github.com/palera1n/palera1n/releases/tag/v2.0.0-beta.7

Please don't use from v2.0.0 beta 8: Dusk version (Not working)

Rootful has some issue (You must use only Ellekit currently, bcz Substitute was deleted by repo maintainer)

Hello, thank you for reply. I've spent my last few hours to delete up-to-date palera1n on my macbook, reinstall v2 beta 7, and yes. it did work for some time, i've installed my gps spoof app. but the problem is, any of jailbreak bypass apps are not working right now for driver apps. And i dont know what did trigger, my phone has no wifi access now and it resets itself every 5 mins like happened before. I was using sniper bypass on ios 15.7 with no problem, also i know someone using it on ios 16.7.1 with no problem. anyways, nothing is working on ios 16.7.8

from palera1n.

For those who are struggling to jailbreak rootfully iPhone X on iOS 16.7.8 with Palerain, this is how I managed to do it:

1. First Create fakeFS using palerain v2.0.0-beta.7:

palera1n-7 -c -f

2. Now, if you use beta.7 to jailbreak, tweaks won't work. Thus, you need to jailbreak using palerain v2.0.0-beta.9.1:

palera1n-9.1 -f

from palera1n.

Anyone here can test this new build? https://github.com/palera1n/palera1n/releases/tag/v2.0.0-beta.9.2 to see if rootful works

from palera1n.