HTML reporters are unable to load about pa11y-ci HOT 6 CLOSED

Thanks @careyestes, a couple of people have reported a similar issue, and this may be the cause (didn't hear back on the others). I did check and both global or both local work, the mix is the problem.

from pa11y-ci.

Hi @careyestes!

I'm not sure what documentation you're following. pa11y-reporter-html is a reporter that comes with pa11y by default, and it doesn't require to be installed separately.

pa11y-ci-reporter-html is a reporter for pa11y-ci (and not pa11y), developed by @aarongoldenthal. You should have a look at it's readme and try to follow the instructions to run it:
https://gitlab.com/gitlab-ci-utils/pa11y-ci-reporter-html/-/blob/master/README.md

If you find any problems with pa11y-ci, feel free to create a new issue, and include the commands that you've run, and the output shown by the tools, and we'll be happy to have a look.

If you're having problems with pa11y-ci-reporter-html I would suggest so create an issue in its repo.

Thank you!

from pa11y-ci.

To answer

I'm not sure what documentation you're following.

I am following the documentation in the repo connected to this issue board: https://github.com/pa11y/pa11y-ci#reporters which says to use pa11y-reporter-html.

If you find any problems with pa11y-ci, feel free to create a new issue, and include the commands that you've run, and the output shown by the tools, and we'll be happy to have a look.

The command I am running is: pa11y-ci https://pa11y.org/ and my config looks like this:

{
    "defaults": {
        "timeout": 10000,
        "standard": "WCAG2AA",
        "runners": ["axe"],
        "reporters": [
          ["json", { "fileName": "./www/a11y-reports/json/results.json" }],
          [
            "pa11y-ci-reporter-html",
            { "destination": "./www/a11y-reports/html", "includeZeroIssues": true }
          ],
          "pa11y-reporter-html"
      ]
    }
}

I have tried both reporters as I mentioned. Both throw the same Unable to load reporter error. Now if this is an issue with the pa11y-ci-reporter-html package, then I will be happy to post it there, but I have no way of knowing that. Just want to confirm I am posting the issue in the repo for the pa11y-ci package. The comment about where I was following the documentation threw me a bit.

from pa11y-ci.

@careyestes That config ran fine for me. That message is pa11y-ci trying to load the reporter and failing (it tries to require the module name, and if that fails tries to load as a filename, so it's not finding the reporter packages). Are pa11y-ci and the reporters installed globally/locally (it shouldn't make a difference, but just trying to replicate)? If you run npm list pa11y-ci-reporter-html does it show the reporter listed?

On pa11y-reporter-html, I expect it's probably not what you want. The output for the pa11y reporters is currently not output by pa11y-ci per #174. The pa11y-ci-reporter-html reporter will generate an equivalent HTML report per page.

from pa11y-ci.

@aarongoldenthal Ive got pally-ci installed globally. pa11y-ci-reporter-html is installed locally. If I run the list command I get:
└── [email protected]
It was my assumption that the ci reporter was the one I should use, but the documentation says use pa11y-reporter-html, so I was following those directions. It seems unlikely, but could the issue be because I have both pa11y-reporter-html and pa11y-ci-reporter-html installed locally? I will also try to install the reporter globally and see if it runs.

from pa11y-ci.

The local installation was the issue. You must have both pa11y-ci and pa11y-ci-reporter-html installed globally. The documentation should be updated.

from pa11y-ci.