Comments (15)
could you show the output of ./bgperf.py doctor
?
from bgperf.
Sure!
21:18:11 [dotwaffle@hasselhoff:~/Code/bgperf] master ± ./bgperf.py doctor
docker version ... ok (17.05.0-ce)
bgperf image ... ok
gobgp image ... ok
bird image ... ok
quagga image ... ok
/proc/sys/net/ipv4/neigh/default/gc_thresh3 ... 1024
from bgperf.
thanks, I'll try to reproduce the issue with the same docker version you are using.
from bgperf.
Appreciated, thank you!
from bgperf.
I tried with docker 17.05.0-ce
but couldn't reproduce the issue.
Does this happen everytime or occasionally?
from bgperf.
Every time. I'm assuming this is more likely a python issue?
from bgperf.
yes, it seems so.
Could you add print stat
like below and see what the stat contains?
# base.py line 179
print stat
queue.put({'who': self.name, 'cpu': cpu_percentage, 'mem': stat['memory_stats']['usage']})
from bgperf.
15:42:59 [dotwaffle@hasselhoff:~/Code/bgperf] master(+1/-0) 1 ± sudo ./bgperf.py bench
creating Docker network "bgperf-br" with subnet 10.10.0.0/16
run monitor
run gobgp
waiting bgp connection between gobgp and monitor
run tester tester type normal
tester booting.. (100/100)
elapsed: 0sec, cpu: 0.00%, mem: 0.00B, recved: 9900
{u'blkio_stats': {u'io_service_time_recursive': [], u'sectors_recursive': [], u'io_service_bytes_recursive': [], u'io_serviced_recursive': [], u'io_time_recursive': [], u'io_queue_recursive': [], u'io_merged_recursive': [], u'io_wait_time_recursive': []}, u'precpu_stats': {u'cpu_usage': {u'total_usage': 0, u'usage_in_kernelmode': 0, u'usage_in_usermode': 0}, u'throttling_data': {u'throttled_time': 0, u'periods': 0, u'throttled_periods': 0}}, u'name': u'/bgperf_gobgp_target', u'read': u'2017-06-15T15:44:00.155074129Z', u'storage_stats': {}, u'networks': {u'eth1': {u'tx_dropped': 0, u'rx_packets': 27, u'rx_bytes': 2285, u'tx_errors': 0, u'rx_errors': 0, u'tx_bytes': 0, u'rx_dropped': 0, u'tx_packets': 0}, u'eth0': {u'tx_dropped': 0, u'rx_packets': 8467, u'rx_bytes': 632884, u'tx_errors': 0, u'rx_errors': 0, u'tx_bytes': 6148219, u'rx_dropped': 0, u'tx_packets': 10928}}, u'num_procs': 0, u'preread': u'0001-01-01T00:00:00Z', u'memory_stats': {}, u'pids_stats': {}, u'id': u'22a9c2cfb0a9a224c465a7a913774e46036e942366ce767cecb07d218156e516', u'cpu_stats': {u'cpu_usage': {u'usage_in_usermode': 6770000000, u'total_usage': 7265281488, u'percpu_usage': [994928057, 945538940, 1159216139, 968660265, 857438607, 781201737, 795383303, 762914440], u'usage_in_kernelmode': 300000000}, u'system_cpu_usage': 2071616930000000, u'online_cpus': 8, u'throttling_data': {u'throttled_time': 0, u'periods': 0, u'throttled_periods': 0}}}
Exception in thread Thread-2:
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner
self.run()
File "/usr/lib/python2.7/threading.py", line 763, in run
self.__target(*self.__args, **self.__kwargs)
File "/srv/home/dotwaffle/Code/bgperf/base.py", line 180, in stats
queue.put({'who': self.name, 'cpu': cpu_percentage, 'mem': stat['memory_stats']['usage']})
KeyError: 'usage'
elapsed: 2sec, cpu: 0.00%, mem: 0.00B, recved: 10000
15:44:02 [dotwaffle@hasselhoff:~/Code/bgperf] master(+1/-0) ±
from bgperf.
thanks.
Could you try the latest master branch?
Should be fixed by #21
from bgperf.
Well, it proceeded further than last time, but doesn't seem to be giving good results!
21:20:58 [dotwaffle@hasselhoff:~/Code/bgperf] master ± sudo ./bgperf.py bench
removing target container bgperf_bird_target
removing monitor container bgperf_monitor
removing tester container bgperf_exabgp_tester_tester
Docker network "bgperf-br" already exists
run monitor
run gobgp
waiting bgp connection between gobgp and monitor
run tester tester type normal
tester booting.. (100/100)
elapsed: 2sec, cpu: 0.00%, mem: 0.00B, recved: 10000
21:22:02 [dotwaffle@hasselhoff:~/Code/bgperf] master ± sudo ./bgperf.py bench -t quagga
removing target container bgperf_gobgp_target
removing monitor container bgperf_monitor
removing tester container bgperf_exabgp_tester_tester
Docker network "bgperf-br" already exists
run monitor
run quagga
waiting bgp connection between quagga and monitor
run tester tester type normal
tester booting.. (100/100)
elapsed: 3sec, cpu: 0.19%, mem: 0.00B, recved: 10000
21:23:06 [dotwaffle@hasselhoff:~/Code/bgperf] master ±
from bgperf.
After the benchmark, try docker stats
.
Does it show memory info?
from bgperf.
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
7f2771319bfb 22.65% 0B / 0B 0.00% 6.11MB / 639kB 0B / 0B 0
d30c3f482ae1 0.02% 0B / 0B 0.00% 658kB / 6.18MB 0B / 0B 0
8d0cd73f5b38 0.00% 0B / 0B 0.00% 99.2kB / 7.35kB 0B / 0B 0
^C% 23:21:40 ⌂114% [dotwaffle@hasselhoff:~/Code/bgperf] master 130 ± docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
7f2771319bfb bgperf/exabgp "bash" About a minute ago Up About a minute bgperf_exabgp_tester_tester
d30c3f482ae1 bgperf/gobgp "bash" About a minute ago Up About a minute bgperf_gobgp_target
8d0cd73f5b38 bgperf/gobgp "bash" About a minute ago Up About a minute bgperf_monitor
23:21:44 ⌂114% [dotwaffle@hasselhoff:~/Code/bgperf] master ±
Well, that's curious!
from bgperf.
I've just followed http://awhitehatter.me/debian-jessie-wdocker/ and re-run:
23:27:42 [dotwaffle@hasselhoff:~/Code/bgperf] master ± ./bgperf.py bench
creating Docker network "bgperf-br" with subnet 10.10.0.0/16
run monitor
run gobgp
waiting bgp connection between gobgp and monitor
run tester tester type normal
tester booting.. (100/100)
elapsed: 2sec, cpu: 0.00%, mem: 30.16MB, recved: 10000
23:28:54 ⌂69% [dotwaffle@hasselhoff:~/Code/bgperf] master ± ./bgperf.py bench -t quagga
removing target container bgperf_gobgp_target
removing monitor container bgperf_monitor
removing tester container bgperf_exabgp_tester_tester
Docker network "bgperf-br" already exists
run monitor
run quagga
waiting bgp connection between quagga and monitor
run tester tester type normal
tester booting.. (100/100)
elapsed: 4sec, cpu: 0.13%, mem: 422.40MB, recved: 10000
23:30:09 ⌂141% [dotwaffle@hasselhoff:~/Code/bgperf] master ± ./bgperf.py bench -t bird
removing target container bgperf_quagga_target
removing monitor container bgperf_monitor
removing tester container bgperf_exabgp_tester_tester
Docker network "bgperf-br" already exists
run monitor
run bird
waiting bgp connection between bird and monitor
run tester tester type normal
tester booting.. (100/100)
elapsed: 2sec, cpu: 0.00%, mem: 134.98MB, recved: 10000
23:31:10 ⌂130% [dotwaffle@hasselhoff:~/Code/bgperf] master ±
from bgperf.
nice! Thanks for the report.
I'm closing this one.
from bgperf.
Thank you, @ishidawataru -- it means a lot that you'd help me diagnose this to that extent!
Best of luck with the project!
from bgperf.
Related Issues (4)
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from bgperf.