FS#35 - mynet-n750 factory images don't find root partition about openwrt HOT 3 CLOSED

CRCinAU:

As a comparison, this is the mtd layout for a working r813 installed via sysupgrade:

[ 0.641377] 6 cmdlinepart partitions found on MTD device spi0.0
[ 0.647398] Creating 6 MTD partitions on "spi0.0":
[ 0.652268] 0x000000000000-0x000000040000 : "u-boot"
[ 0.659339] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.666300] 0x000000050000-0x000000060000 : "devdata"
[ 0.672994] 0x000000060000-0x000000070000 : "devconf"
[ 0.679627] 0x000000070000-0x000000ff0000 : "firmware"
[ 0.715565] 2 seama-fw partitions found on MTD device firmware
[ 0.721501] 0x000000070040-0x0000001d0000 : "kernel"
[ 0.727929] 0x0000001d0000-0x000000ff0000 : "rootfs"
[ 0.734550] mtd: device 6 (rootfs) set to be root filesystem
[ 0.740345] 1 squashfs-split partitions found on MTD device rootfs
[ 0.746668] 0x0000003b0000-0x000000ff0000 : "rootfs_data"
[ 0.753793] 0x000000ff0000-0x000001000000 : "radiocfg"

EDIT: Nightly images to check are available at: http://openwrt.crc.id.au/

from openwrt.

CRCinAU:

Just to update the record, I pinged yousong regarding this as suggested by jow - got the following reply:

Probably because recently I submitted a patch to use mtdsplit to
auto-split rootfs from firmware partition for HiWiFi HC6361. I will
see if I can find the cause of issue in the case of mynet-n750 ;)

from openwrt.

john:

can you please test if this still happens with yousongs patch which i applied to my staging tree ?

from openwrt.