FS#16 - Bug with PPPoE (Lantiq) about openwrt HOT 8 CLOSED

mkresin:

Then restart the network with init.d to apply the changes, that made it create the virtual nas0 interface and connected fine.

But, on last builds it doesn’t seem to create the nas0 virtual interface anymore even with the same network configuration which i double checked several times.

Is the nas0 device created after a reboot?

So I’ve tried to recompile an old snapshot (r555) which works completely fine without any change.

Would it be possible that you try more revisions between r555 and r731, to find the revision where it breaks.

from openwrt.

markuznw:

Thanks for the fast reply

//"Is the nas0 device created after a reboot?"//

Unfortunately not, I tried several reboots too but nothing changes

//"Would it be possible that you try more revisions between r555 and r731, to find the revision where it breaks."//

Sure, will do it as soon as possible with some 'interim' revisions between those hoping it can help

from openwrt.

hitech95:

I can confirm the same issue. NAS0 is not created. Is missing the ltq-atm-vr9 module.

Same problem with other xrx200 hardware. (Tested on both W8970 and BT Home Hub 5)

Edit:
Looks that the last working commit is: 239ad94

from openwrt.

medber:

I can confirm this issue too on ARV7519RW22. ltq-atm-vr9 module is missing.

from openwrt.

mkresin:

I guess I found the issue. Can anyone please confirm that the attached patch fixes the issue.

from openwrt.

medber:

Mathias Kresin: I tested your patch and it fixed the reported issue. Thanks ;)

from openwrt.

mkresin:

Thanks for the feedback. I've send the patch for inclusion.

from openwrt.

markuznw:

Thank you Mathias. Confirmed working as of this morning (didn't have access to the router until now)
Waiting for the inclusion to close the bug report :-)

from openwrt.