resizing root partition on raspberry pi 5 causes failure to boot about openwrt HOT 5 OPEN

Have you properly followed instructions with losetup?
https://openwrt.org/docs/guide-user/advanced/expand_root

from openwrt.

Have you properly followed instructions with losetup?
https://openwrt.org/docs/guide-user/advanced/expand_root

Yes, many times. It runs and reboots (I assume the first time after parted), but fails to actually boot.

In fact, if you read the script from that link, you will see the parted commands I have used above.

from openwrt.

The forum post https://forum.openwrt.org/t/expanding-root-soft-bricks-raspberry-pi-5/199784 shows individual resize2fs commands on your part. Please do full script piece by piece manually in failsafe mode boot. Kind of "works for me".

from openwrt.

The forum post https://forum.openwrt.org/t/expanding-root-soft-bricks-raspberry-pi-5/199784 shows individual resize2fs commands on your part. Please do full script piece by piece manually in failsafe mode boot. Kind of "works for me".

That's my forum post - I'm robot-ranger. Ksofen's instructions do work.

... But The issue here is the automated script you linked doesn't work on raspi5, where as it does work on raspi4, cm4 and nano pi r4s.

from openwrt.

I got that part about names ;-)
This is wiki issue, down in forums. Instruction works perfecly on x86.

from openwrt.