Instructions for running OPTEE on a board about build HOT 7 CLOSED

Seems like Xilinx 7000 is only supported in https://github.com/OP-TEE/optee_os, but not here in https://github.com/OP-TEE/build. You can maybe try to contact the maintainers (Yan Yan and Feng Yu) for more info: https://github.com/OP-TEE/optee_os/blob/master/MAINTAINERS.md.

from build.

Right, I asked them and they told me how to build OPTEE. But I miss the understanding of the rest of the system? Like what Linux and bootloaders should I use and how to build them? How do I package all the stuff together and use it on the board?

from build.

Right, Linaro doesn't currently have the 7000 board so you'll have to get those other info from them as well. It looks like you've posted your question on OP-TEE/optee_os#1964 so can this be closed? Thanks!

from build.

Yes, I asked it there. i would close the issue, but I'd really want to understand the general guidelines:

1. Where should I be taking the bootloaders and Linux in general case?
2. How should I package all of this together?

from build.

For all Linaro maintained platforms this is the place, i.e. our build.git. The "build.git" will pick everything from:

• https://github.com/OP-TEE
• https://github.com/linaro-swg
• And a few other upstream repos (busybox, EDK2, QEMU, Grub etc).

For platforms that we aren't maintaining by ourselves, it is hard for us to say, since in some cases they have trees internally for their devices. So I second what @vchong said, it's the Xilinx guys (Sören) that would know exactly.

from build.

I'm closing the ticket, either because it has already been answered or that it is no longer relevant or it could be lack of response from the author. Having that said, feel free to re-open the ticket if you have more to add to the ticket.

from build.

Hi,
@mkravchik, you mentioned they told you how to build, did you finally package them together and use it on the board?
How did you create the linux image with optee integrated?

from build.