LG Range target temperature entities not working about ha-smartthinq-sensors HOT 18 CLOSED

FWIW, my target temperature does work:

from ha-smartthinq-sensors.

Thanks, thomaskistler, Mine is a dual oven and the only 2 entities that don't work are the target temps.

I not sure if anyone is paying much attention to this custom integration any more.

from ha-smartthinq-sensors.

Please attach integration diagnostics (while device is on and target temperature set) so that I can analyze your payload.

from ha-smartthinq-sensors.

@Waank1 ,

please try is last release fix the issue.

from ha-smartthinq-sensors.

I tried it and it is working perfectly now. Thank you!

from ha-smartthinq-sensors.

Good, I close this.

from ha-smartthinq-sensors.

I spoke too soon. Now the current temperature is not working....... But the target temperature is. Actually they are both all over the place, current and target for upper and lower are now very inconsistent.

from ha-smartthinq-sensors.

I need more information. Please attach new diagnostic with the device turned on so that I can analyze returned data. If possible also collect some logs with debug level.

from ha-smartthinq-sensors.

I need diagnostics generated when target temperature is set, I think that the issue is related to unit of measure, but I need to see the values returned to understand where is the error.

from ha-smartthinq-sensors.

@Waank1,

you attach hacs diagnostics, I need integration diagnostiscs.

from ha-smartthinq-sensors.

Unfortunately this doesn't seems to be an issue related to the integration but the way the data is provided. When target temperature value is set, the current temperature returned is 0, at least in the payload present in the diagnostics provided, and for this reason is set to None (unknown in UI)
My question is: what are the information provided by LG app?

from ha-smartthinq-sensors.

It has been many months since I have looked at the LG app. I just checked, it only provides the temperature (which is very slow to update) and the status ie. preheating, baking, broiling etc.

from ha-smartthinq-sensors.

When you say temperature you mean target or current? Could you extract a diagnostic when temperature is shown in LG app and give me detail (may be a picture) of information shown in the app at that moment?

from ha-smartthinq-sensors.

Tis is quite complex situation. Your app is saying 72, but in the payload I just see the target temperature = 200. It is also providing a value of 77 for the Lower Cook temp, just wondering if this value could be inverted.
As first option you could try to collect some information in different condition (up on and low off, up off and low on, both on) and send diagnostic in every situation so that I can try to understand if there is some logics....

from ha-smartthinq-sensors.

from ha-smartthinq-sensors.

@Waank1,

the situation is always the same, I see all values that do not match with value you provide, most of them set to 0.
Please enable debug log and send me log file, the last thing I can do is check the raw data to verify if it is properly converted to status data. I would be surprised if something is wrong because should fail most of devices, but everything is possible...

from ha-smartthinq-sensors.

This issue is stale because it has been open 45 days with no activity. Remove stale label or comment or this will be closed in 7 days.

from ha-smartthinq-sensors.

This issue was closed because it has been stalled for 7 days with no activity.

from ha-smartthinq-sensors.