Comments (10)
ollo69
commented on June 25, 2024
1
Pause button is now available with last release. Please test is and report here results.
from ha-smartthinq-sensors.
FilippoS1973
commented on June 25, 2024
I Agree, feature request very usefull. However, I don't know if it's easy to create. In any case, thanks Ollo69!
from ha-smartthinq-sensors.
FilippoS1973
commented on June 25, 2024
I'll specify better. Currently the ability to turn off the washing machine from HA is integrated and it works.
However, if we use this switch to manage a load control, we are not able to restart it and, if we do it manually from the washing machine, when it is turned back on, the washing machine has lost the wash information and we have to start again from the beginning.
For these reasons it would be very useful to integrate the possibility of the pause button that is present in the LG app.
from ha-smartthinq-sensors.
FilippoS1973
commented on June 25, 2024
test ok. pause command works from ha. well done!
new issue. to resume program from ha I used "remote start" of this release but washing machine started program from scratch.
from ha-smartthinq-sensors.
ollo69
commented on June 25, 2024
new issue. to resume program from ha I used "remote start" of this release but washing machine started program from scratch.
Was it working properly with previous release?
Could someone capture traffic from Mobile app to see the command used to resume?
Please also attach device diagnostics so that I can take a look to your model info and maybe found additional info.
from ha-smartthinq-sensors.
FilippoS1973
commented on June 25, 2024
the pause/resume button from the app works fine. the "remote start" button in HA works the same way in the previous release: it starts the program from scratch.
we need to understand how to replicate the app's resume button.
I attach the diagnostics
from ha-smartthinq-sensors.
ollo69
commented on June 25, 2024
Unfortunately diagnostics do not provide additional info. I suppose that is just a matter of calling WMStart with different parameter but we need to capture traffic from LG App.
I will try to do this my side but I have a APIv1 device and commands are different from APIv2
from ha-smartthinq-sensors.
ollo69
commented on June 25, 2024
Maybe I found the reason, could be the initial_bit value send with the start command. Please try last release and let me know if fix the issue.
from ha-smartthinq-sensors.
FilippoS1973
commented on June 25, 2024
Well done, I tested and it works perfectly
thank you
Il giorno lun 5 feb 2024 alle ore 01:55 ollo69 ***@***.***>
ha scritto:
… Maybe I found the reason, could be the initial_bit value send with the
start command. Please try last release and let me know if fix the issue.
—
Reply to this email directly, view it on GitHub
<#627 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AOFYIF4LINMG3SQAPLFC2LLYSAUWRAVCNFSM6AAAAAA6PDXAXCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRWGAZTEOBQGQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
from ha-smartthinq-sensors.
ollo69
commented on June 25, 2024
Good, close this.
from ha-smartthinq-sensors.
Related Issues (20)
- Issues with smartthinq sensors after core update to 24.2.3 HOT 1
- Refrigerator and Freezer temperatures not accurate HOT 1
- Can't start washer - "expecting property name enclosed in double quotes" HOT 6
- OVEN COOKTOP STATE not working? HOT 16
- ClimateEntityFeature.TURN_OFF implements the turn_off method HOT 1
- Display Light switch not working (Airco) HOT 2
- Support for power saving mode on AC HOT 2
- Not understanding Remote Start for washer and dryer HOT 3
- Wake up not working HOT 1
- Notifications trigger when turned on HOT 5
- Can`t login after reboot HA, can't connect to any device HOT 1
- sensor.washer_run_state and sensor.washer_water_temp are giving weird states HOT 2
- Support sending command to activate Fresh Care or KeepFresh mode after a wash has started HOT 1
- Not getting a value back HOT 1
- Issue with credentials HOT 3
- Update readme for social media account
- Not working on 2024.4.0b0 HOT 26
- v0.39.0 fail on startup with: No module named 'custom_components.smartthinq_sensors.wideq.devices.range' HOT 4
- smartthinq_sensors ERROR HOT 1
- Not working in 2024.4.1 HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ha-smartthinq-sensors.