Alarm Decoder Disconnect - Related to Home Assistant? about alarmdecoder HOT 10 CLOSED

On Thu, May 10, 2018 at 8:33 PM, SP410 ***@***.***> wrote: Hello Alarm Decoder team, while using Home Assistant, the following error was reported from Alarm Decoder. I am very hopeful you are able to help, I quite enjoy using alarm decoder with my home automation system. For more information, see: home-assistant/core#14352 <home-assistant/core#14352> Error during setup of component alarmdecoder Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/homeassistant/setup.py", line 145, in _async_setup_component component.setup, hass, processed_config) File "/usr/lib/python3.6/concurrent/futures/thread.py", line 56, in run result = self.fn(*self.args, **self.kwargs) File "/usr/lib/python3.6/site-packages/homeassistant/components/alarmdecoder.py", line 166, in setup AlarmDecoder(USBDevice.find()) File "/usr/lib/python3.6/site-packages/alarmdecoder/devices/usb_device.py", line 109, in find raise ImportError('The USBDevice class has been disabled due to missing requirement: pyftdi or pyusb.') ImportError: The USBDevice class has been disabled due to missing requirement: pyftdi or pyusb. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#25>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ADJ_fMZthGyA__OiY6ipLiJFWkh-dklrks5txQaIgaJpZM4T62q4> .

On Sun, May 13, 2018 at 2:07 PM, SP410 ***@***.***> wrote: When using serial device type, I experience random disconnects in home assistant (this is how I currently use Alarm Decoder). The home assistant devs advise that nutech is importing dependencies in-correctly. Any advice? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#25 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ADJ_fOEJb8bdgGeRU2Ua-Kxe3JKDnjQMks5tyKB8gaJpZM4T62q4> .

On Tue, May 15, 2018 at 5:35 AM, SP410 ***@***.***> wrote: I switched to Ser2Sock via docker. There is no indication of an error; the AUI messages just stop working. After restarting Ser2Sock (no changes to USB), I receive the following: [✔] Using config file: /etc/ser2sock.conf [✔] Serial 2 Socket Relay version V1.5.5 starting [✔] Listening socket created on port 8100 [✔] Start wait loop using ser2sock communication mode [✔] Opened com port at /dev/ttyUSB0 [✔] Setting speed 115200 [✔] Set speed successful [✔] Socket connected slot 2 [‼] Closing socket fd slot 2 errno: 0 'No error information' [✔] Socket connected slot 2 Is there a way to enable more detailed logging? Would love to find the issue. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#25 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ADJ_fII2WanX6FsOkJSJ8MoxC5epryFpks5tysukgaJpZM4T62q4> .

What's your device configuration? To see AUI I believe your configbits need to be at least FF05 *Sent with Shift <https://tryshift.com/?utm_source=SentWithShift&utm_ campaign=Sent%20with%20Shift%20Signature&utm_medium=Email% 20Signature&utm_content=General%20Email%20Group>* On Tue, May 15, 2018 at 5:35 AM, SP410 ***@***.***> wrote: > I switched to Ser2Sock via docker. There is no indication of an error; the > AUI messages just stop working. > > After restarting Ser2Sock (no changes to USB), I receive the following: > > [✔] Using config file: /etc/ser2sock.conf > [✔] Serial 2 Socket Relay version V1.5.5 starting > [✔] Listening socket created on port 8100 > [✔] Start wait loop using ser2sock communication mode > [✔] Opened com port at /dev/ttyUSB0 > [✔] Setting speed 115200 > [✔] Set speed successful > [✔] Socket connected slot 2 > [‼] Closing socket fd slot 2 errno: 0 'No error information' > [✔] Socket connected slot 2 > > Is there a way to enable more detailed logging? Would love to find the > issue. > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#25 (comment)- 389150714>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ADJ_ fII2WanX6FsOkJSJ8MoxC5epryFpks5tysukgaJpZM4T62q4> > . > — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#25 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AHy5ReCyLUNvNswk8ETlsAaveS_S6FJ2ks5ty4n2gaJpZM4T62q4> .

On Wed, Jun 27, 2018 at 3:38 PM, Wilson Bradley ***@***.***> wrote: Hi, Hoping you could help me figure what is going on. For some reason my alarm system is stuck at [Please Wait Loading...] I didn't do any updates, not sure Im getting a lot of python script errors. ​2018-06-27 13:33:37,840 INFO: AlarmDecoder Webapp booting up - v0.8.1-9-g0664184 [in /opt/alarmdecoder-webapp/ad2web/decoder.py:222] 2018-06-27 13:33:38,170 ERROR: Error [in /opt/alarmdecoder-webapp/ ad2web/app.py:175] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/app.py", line 168, in init_app app.decoder.init() File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 240, in init self._notifier_system = NotificationSystem() File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 88, in __init__ self._init_notifiers() File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 214, in _init_notifiers self._notifiers[n.id] = TYPE_MAP[n.type](n) File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 927, in __init__ self.auth_username = self.auth_username.replace('\n', '') AttributeError: 'NoneType' object has no attribute 'replace' 2018-06-27 14:55:47,422 ERROR: Error sending keypress to device [in /opt/alarmdecoder-webapp/ad2web/decoder.py:854] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in on_keypress self._alarmdecoder.device.send(key) AttributeError: 'NoneType' object has no attribute 'send' 2018-06-27 14:55:48,343 ERROR: Error sending keypress to device [in /opt/alarmdecoder-webapp/ad2web/decoder.py:854] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in on_keypress self._alarmdecoder.device.send(key) AttributeError: 'NoneType' object has no attribute 'send' 2018-06-27 14:55:49,264 ERROR: Error sending keypress to device [in /opt/alarmdecoder-webapp/ad2web/decoder.py:854] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in on_keypress self._alarmdecoder.device.send(key) AttributeError: 'NoneType' object has no attribute 'send' 2018-06-27 14:55:50,083 ERROR: Error sending keypress to device [in /opt/alarmdecoder-webapp/ad2web/decoder.py:854] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in on_keypress self._alarmdecoder.device.send(key) AttributeError: 'NoneType' object has no attribute 'send' 2018-06-27 14:55:55,348 ERROR: Error sending keypress to device [in /opt/alarmdecoder-webapp/ad2web/decoder.py:854] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in on_keypress self._alarmdecoder.device.send(key) AttributeError: 'NoneType' object has no attribute 'send' 2018-06-27 14:56:07,669 ERROR: Error sending keypress to device [in /opt/alarmdecoder-webapp/ad2web/decoder.py:854] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in on_keypress self._alarmdecoder.device.send(key) AttributeError: 'NoneType' object has no attribute 'send' 2018-06-27 15:09:26,151 INFO: AlarmDecoder Webapp booting up - v0.8.1-5-gb072411 [in /opt/alarmdecoder-webapp/ad2web/decoder.py:222] 2018-06-27 15:09:26,481 ERROR: Error [in /opt/alarmdecoder-webapp/ ad2web/app.py:175] Traceback (most recent call last): File "/opt/alarmdecoder-webapp/ad2web/app.py", line 168, in init_app app.decoder.init() File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 240, in init self._notifier_system = NotificationSystem() File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 88, in __init__ self._init_notifiers() File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 214, in _init_notifiers self._notifiers[n.id] = TYPE_MAP[n.type](n) File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 927, in __init__ self.auth_username = self.auth_username.replace('\n', '') AttributeError: 'NoneType' object has no attribute 'replace' ​ Sincerely, Wilson Bradley ***@***.*** On Tue, May 15, 2018 at 9:07 PM, Kevin Roberts ***@***.***> wrote: > What's your device configuration? To see AUI I believe your configbits > need to be at least FF05 > > *Sent with Shift > <https://tryshift.com/?utm_source=SentWithShift&utm_campaign > =Sent%20with%20Shift%20Signature&utm_medium=Email%20Signatur > e&utm_content=General%20Email%20Group>* > > On Tue, May 15, 2018 at 5:35 AM, SP410 ***@***.***> wrote: > > > I switched to Ser2Sock via docker. There is no indication of an error; > the > > AUI messages just stop working. > > > > After restarting Ser2Sock (no changes to USB), I receive the following: > > > > [✔] Using config file: /etc/ser2sock.conf > > [✔] Serial 2 Socket Relay version V1.5.5 starting > > [✔] Listening socket created on port 8100 > > [✔] Start wait loop using ser2sock communication mode > > [✔] Opened com port at /dev/ttyUSB0 > > [✔] Setting speed 115200 > > [✔] Set speed successful > > [✔] Socket connected slot 2 > > [‼] Closing socket fd slot 2 errno: 0 'No error information' > > [✔] Socket connected slot 2 > > > > Is there a way to enable more detailed logging? Would love to find the > > issue. > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub > > <#25# > issuecomment-389150714>, > > or mute the thread > > <https://github.com/notifications/unsubscribe-auth/ADJ_fII2W > anX6FsOkJSJ8MoxC5epryFpks5tysukgaJpZM4T62q4> > > . > > > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#25 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AHy5ReCyLUNvNswk8ETlsAaveS_S6FJ2ks5ty4n2gaJpZM4T62q4> > . >

On Wed, Jun 27, 2018 at 3:59 PM, Wilson Bradley ***@***.***> wrote: The Web server was working in the past Using the Windows App it communicates. Sincerely, Wilson Bradley ***@***.*** On Wed, Jun 27, 2018 at 3:38 PM, Wilson Bradley ***@***.***> wrote: > Hi, > > Hoping you could help me figure what is going on. For some reason my > alarm system is stuck at [Please Wait Loading...] > I didn't do any updates, not sure Im getting a lot of python script > errors. > > ​2018-06-27 13:33:37,840 INFO: AlarmDecoder Webapp booting up - > v0.8.1-9-g0664184 [in /opt/alarmdecoder-webapp/ad2web/decoder.py:222] > 2018-06-27 13:33:38,170 ERROR: Error [in /opt/alarmdecoder-webapp/ad2we > b/app.py:175] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/app.py", line 168, in init_app > app.decoder.init() > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 240, in init > self._notifier_system = NotificationSystem() > File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 88, > in __init__ > self._init_notifiers() > File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 214, > in _init_notifiers > self._notifiers[n.id] = TYPE_MAP[n.type](n) > File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 927, > in __init__ > self.auth_username = self.auth_username.replace('\n', '') > AttributeError: 'NoneType' object has no attribute 'replace' > 2018-06-27 14:55:47,422 ERROR: Error sending keypress to device [in > /opt/alarmdecoder-webapp/ad2web/decoder.py:854] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in > on_keypress > self._alarmdecoder.device.send(key) > AttributeError: 'NoneType' object has no attribute 'send' > 2018-06-27 14:55:48,343 ERROR: Error sending keypress to device [in > /opt/alarmdecoder-webapp/ad2web/decoder.py:854] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in > on_keypress > self._alarmdecoder.device.send(key) > AttributeError: 'NoneType' object has no attribute 'send' > 2018-06-27 14:55:49,264 ERROR: Error sending keypress to device [in > /opt/alarmdecoder-webapp/ad2web/decoder.py:854] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in > on_keypress > self._alarmdecoder.device.send(key) > AttributeError: 'NoneType' object has no attribute 'send' > 2018-06-27 14:55:50,083 ERROR: Error sending keypress to device [in > /opt/alarmdecoder-webapp/ad2web/decoder.py:854] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in > on_keypress > self._alarmdecoder.device.send(key) > AttributeError: 'NoneType' object has no attribute 'send' > 2018-06-27 14:55:55,348 ERROR: Error sending keypress to device [in > /opt/alarmdecoder-webapp/ad2web/decoder.py:854] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in > on_keypress > self._alarmdecoder.device.send(key) > AttributeError: 'NoneType' object has no attribute 'send' > 2018-06-27 14:56:07,669 ERROR: Error sending keypress to device [in > /opt/alarmdecoder-webapp/ad2web/decoder.py:854] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 851, in > on_keypress > self._alarmdecoder.device.send(key) > AttributeError: 'NoneType' object has no attribute 'send' > 2018-06-27 15:09:26,151 INFO: AlarmDecoder Webapp booting up - > v0.8.1-5-gb072411 [in /opt/alarmdecoder-webapp/ad2web/decoder.py:222] > 2018-06-27 15:09:26,481 ERROR: Error [in /opt/alarmdecoder-webapp/ad2we > b/app.py:175] > Traceback (most recent call last): > File "/opt/alarmdecoder-webapp/ad2web/app.py", line 168, in init_app > app.decoder.init() > File "/opt/alarmdecoder-webapp/ad2web/decoder.py", line 240, in init > self._notifier_system = NotificationSystem() > File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 88, > in __init__ > self._init_notifiers() > File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 214, > in _init_notifiers > self._notifiers[n.id] = TYPE_MAP[n.type](n) > File "/opt/alarmdecoder-webapp/ad2web/notifications/types.py", line 927, > in __init__ > self.auth_username = self.auth_username.replace('\n', '') > AttributeError: 'NoneType' object has no attribute 'replace' > ​ > > > > Sincerely, > > Wilson Bradley > ***@***.*** > > On Tue, May 15, 2018 at 9:07 PM, Kevin Roberts ***@***.***> > wrote: > >> What's your device configuration? To see AUI I believe your configbits >> need to be at least FF05 >> >> *Sent with Shift >> <https://tryshift.com/?utm_source=SentWithShift&utm_campaign >> =Sent%20with%20Shift%20Signature&utm_medium=Email%20Signatur >> e&utm_content=General%20Email%20Group>* >> >> On Tue, May 15, 2018 at 5:35 AM, SP410 ***@***.***> wrote: >> >> > I switched to Ser2Sock via docker. There is no indication of an error; >> the >> > AUI messages just stop working. >> > >> > After restarting Ser2Sock (no changes to USB), I receive the following: >> > >> > [✔] Using config file: /etc/ser2sock.conf >> > [✔] Serial 2 Socket Relay version V1.5.5 starting >> > [✔] Listening socket created on port 8100 >> > [✔] Start wait loop using ser2sock communication mode >> > [✔] Opened com port at /dev/ttyUSB0 >> > [✔] Setting speed 115200 >> > [✔] Set speed successful >> > [✔] Socket connected slot 2 >> > [‼] Closing socket fd slot 2 errno: 0 'No error information' >> > [✔] Socket connected slot 2 >> > >> > Is there a way to enable more detailed logging? Would love to find the >> > issue. >> > >> > — >> > You are receiving this because you commented. >> > Reply to this email directly, view it on GitHub >> > <#25 (comment) >> suecomment-389150714>, >> > or mute the thread >> > <https://github.com/notifications/unsubscribe-auth/ADJ_fII2W >> anX6FsOkJSJ8MoxC5epryFpks5tysukgaJpZM4T62q4> >> > . >> > >> >> — >> You are receiving this because you are subscribed to this thread. >> Reply to this email directly, view it on GitHub >> <#25 (comment)>, >> or mute the thread >> <https://github.com/notifications/unsubscribe-auth/AHy5ReCyLUNvNswk8ETlsAaveS_S6FJ2ks5ty4n2gaJpZM4T62q4> >> . >> > >