Comments (9)
norberttak
commented on August 24, 2024
1
It works on Windows perfectly.
This morning I did a quick test on my Ubuntu 22.04 and the same issue happened what you wrote. I need some time to debug what is the difference between the two platform (I guess it is something regarding the hid layer again, but I don't know yet)
from xpanel.
norberttak
commented on August 24, 2024
PR created: #104
In this form, it blanks the leading zeros. If a display is not configured, then we turn it off.
@CyberGuerro : please check this version.
Still need to add some configuration options with the following changes:
- new device level option to enable/disable the leading zero blanks
- new line level option to set the minimum character that shall be displayed
- add this blank property to multi panel as well
- sanity check in the config parser to warn about contradictory options
from xpanel.
CyberGuerro
commented on August 24, 2024
Sorry for my late answer....
It seems ok, the only thing I noticed is: the unused display (not declared in configuration, es. in my IDT setting where I use only the LEFT display to show transponder code, the RIGHT display should be switched off instead show "00000")
About
new device level option to enable/disable the leading zero blanks
I think that by default "leading zero blanks" should be disabled (if it's not declared or explicit setting to false)
new line level option to set the minimum character that shall be displayed
What does it mean? how it interacts with above option?
from xpanel.
norberttak
commented on August 24, 2024
Please send me your config, I'd double check it on my environment.
new device level option to enable/disable the leading zero blanks
I think my sentence was misleading. This option shall be enabled by default. That means the leading zeros will be removed by default. I guess that's what you want as well.
new line level option to set the minimum character that shall be displayed
For example, the IDT. This is always 4 characters, even if it starts with zero. So if your transponder code from the ATC is zero-one-two-three we should display as 0123 and not 123 Similar to the heading on multi panels: The HDG value is always 3 characters even if it starts with 0 (025 for example). The minimum character number depends on the function, so that's why I need a line level option.
from xpanel.
CyberGuerro
commented on August 24, 2024
OK, now I understand it.
This is my configuration for C172
; Aircraft specific handler for Zibo 737 XPlane aircraft
log_level="WARNING"
aircraft_acf="Cessna_172SP.acf"
;---------------------- Saitek Radio Panel -------------------------
[device:id="saitek_radio"]
vid="06a3"
pid="0d05"
[multi_display:id="RADIO_DISPLAY_ACTIVE_UP"]
line="on_select:SW_UP_COM1,dataref:sim/cockpit/radios/com1_freq_hz"
line="on_select:SW_UP_COM2,dataref:sim/cockpit/radios/com2_freq_hz"
line="on_select:SW_UP_NAV1,dataref:sim/cockpit/radios/nav1_freq_hz"
line="on_select:SW_UP_NAV2,dataref:sim/cockpit/radios/nav2_freq_hz"
line="on_select:SW_UP_ADF,dataref:sim/cockpit/radios/adf1_freq_hz"
line="on_select:SW_UP_DME,dataref:sim/cockpit/radios/nav1_dme_dist_m"
line="on_select:SW_UP_IDT,dataref:sim/cockpit/radios/transponder_code"
[multi_display:id="RADIO_DISPLAY_STBY_UP"]
line="on_select:SW_UP_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz"
line="on_select:SW_UP_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz"
line="on_select:SW_UP_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz"
line="on_select:SW_UP_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz"
line="on_select:SW_UP_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz"
line="on_select:SW_UP_DME,dataref:sim/cockpit/radios/nav2_dme_dist_m"
[button:id="KNOB_UP_BIG_PLUS"]
on_push="on_select:SW_UP_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_UP_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_UP_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_UP_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_UP_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:100:0:359"
on_push="on_select:SW_UP_IDT,dataref:sim/cockpit/radios/transponder_code:100:0:8888"
[button:id="KNOB_UP_BIG_MINUS"]
on_push="on_select:SW_UP_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_UP_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_UP_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_UP_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_UP_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:-100:0:359"
on_push="on_select:SW_UP_IDT,dataref:sim/cockpit2/radios/actuators/transponder_code:-100:0:8888"
[button:id="KNOB_UP_SMALL_PLUS"]
on_push="on_select:SW_UP_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:5:0:15000"
on_push="on_select:SW_UP_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:5:0:15000"
on_push="on_select:SW_UP_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:1:0:15000"
on_push="on_select:SW_UP_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:1:0:15000"
on_push="on_select:SW_UP_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:1:0:359"
on_push="on_select:SW_UP_IDT,dataref:sim/cockpit/radios/transponder_code:1:0:8888"
[button:id="KNOB_UP_SMALL_MINUS"]
on_push="on_select:SW_UP_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:-5:0:16000"
on_push="on_select:SW_UP_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:-5:0:16000"
on_push="on_select:SW_UP_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:-1:0:16000"
on_push="on_select:SW_UP_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:-1:0:16000"
on_push="on_select:SW_UP_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:-1:0:359"
on_push="on_select:SW_UP_IDT,dataref:sim/cockpit2/radios/actuators/transponder_code:-1:0:8888"
[button:id="ACT_STBY_UP"]
on_push="on_select:SW_UP_COM1,commandref:sim/radios/com1_standy_flip:once"
on_push="on_select:SW_UP_COM2,commandref:sim/radios/com2_standy_flip:once"
on_push="on_select:SW_UP_NAV1,commandref:sim/radios/nav1_standy_flip:once"
on_push="on_select:SW_UP_NAV2,commandref:sim/radios/nav2_standy_flip:once"
on_push="on_select:SW_UP_ADF,commandref:sim/radios/adf1_standy_flip:once"
[multi_display:id="RADIO_DISPLAY_ACTIVE_DOWN"]
line="on_select:SW_DOWN_COM1,dataref:sim/cockpit/radios/com1_freq_hz"
line="on_select:SW_DOWN_COM2,dataref:sim/cockpit/radios/com2_freq_hz"
line="on_select:SW_DOWN_NAV1,dataref:sim/cockpit/radios/nav1_freq_hz"
line="on_select:SW_DOWN_NAV2,dataref:sim/cockpit/radios/nav2_freq_hz"
line="on_select:SW_DOWN_ADF,dataref:sim/cockpit/radios/adf1_freq_hz"
line="on_select:SW_DOWN_DME,dataref:sim/cockpit/radios/nav1_dme_dist_m"
line="on_select:SW_DOWN_IDT,dataref:sim/cockpit/radios/transponder_code"
[multi_display:id="RADIO_DISPLAY_STBY_DOWN"]
line="on_select:SW_DOWN_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz"
line="on_select:SW_DOWN_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz"
line="on_select:SW_DOWN_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz"
line="on_select:SW_DOWN_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz"
line="on_select:SW_DOWN_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz"
line="on_select:SW_DOWN_DME,dataref:sim/cockpit/radios/nav2_dme_dist_m"
[button:id="KNOB_DOWN_BIG_PLUS"]
on_push="on_select:SW_DOWN_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_DOWN_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_DOWN_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_DOWN_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:100:0:15000"
on_push="on_select:SW_DOWN_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:100:0:359"
on_push="on_select:SW_DOWN_IDT,dataref:sim/cockpit/radios/transponder_code:100:0:8888"
[button:id="KNOB_DOWN_BIG_MINUS"]
on_push="on_select:SW_DOWN_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_DOWN_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_DOWN_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_DOWN_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:-100:0:16000"
on_push="on_select:SW_DOWN_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:-100:0:359"
on_push="on_select:SW_DOWN_IDT,dataref:sim/cockpit2/radios/actuators/transponder_code:-100:0:8888"
[button:id="KNOB_DOWN_SMALL_PLUS"]
on_push="on_select:SW_DOWN_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:5:0:15000"
on_push="on_select:SW_DOWN_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:5:0:15000"
on_push="on_select:SW_DOWN_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:1:0:15000"
on_push="on_select:SW_DOWN_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:1:0:15000"
on_push="on_select:SW_DOWN_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:1:0:359"
on_push="on_select:SW_DOWN_IDT,dataref:sim/cockpit/radios/transponder_code:1:0:8888"
[button:id="KNOB_DOWN_SMALL_MINUS"]
on_push="on_select:SW_DOWN_COM1,dataref:sim/cockpit/radios/com1_stdby_freq_hz:-5:0:16000"
on_push="on_select:SW_DOWN_COM2,dataref:sim/cockpit/radios/com2_stdby_freq_hz:-5:0:16000"
on_push="on_select:SW_DOWN_NAV1,dataref:sim/cockpit/radios/nav1_stdby_freq_hz:-1:0:16000"
on_push="on_select:SW_DOWN_NAV2,dataref:sim/cockpit/radios/nav2_stdby_freq_hz:-1:0:16000"
on_push="on_select:SW_DOWN_ADF,dataref:sim/cockpit/radios/adf1_stdby_freq_hz:-1:0:359"
on_push="on_select:SW_DOWN_IDT,dataref:sim/cockpit2/radios/actuators/transponder_code:-1:0:8888"
[button:id="ACT_STBY_DOWN"]
on_push="on_select:SW_DOWN_COM1,commandref:sim/radios/com1_standy_flip:once"
on_push="on_select:SW_DOWN_COM2,commandref:sim/radios/com2_standy_flip:once"
on_push="on_select:SW_DOWN_NAV1,commandref:sim/radios/nav1_standy_flip:once"
on_push="on_select:SW_DOWN_NAV2,commandref:sim/radios/nav2_standy_flip:once"
on_push="on_select:SW_DOWN_ADF,commandref:sim/radios/adf1_standy_flip:once"
;-------------------------------------------------------------------
from xpanel.
norberttak
commented on August 24, 2024
I loaded your configuration. It works here. The IDT right display is blank (turned off) only the left display shows the transponder code. That's the case for the upper and for the lower displays as well.
The 00000 is not diaper whether you switch to another position (COM1 or NAV1) and switch back to IDT?
from xpanel.
CyberGuerro
commented on August 24, 2024
If I turn knob selector to com1 and then return to IDT, right display show COM1 standby and then "0" (no turned off), consider that in that moment DME (previous selection before IDT) selection value for right display is "0".
I noticed another thing: if I turn selector faster (from IDT -> COM1 in 0.5 sec) display show random value between one of the the selection (COM2, NAV1, NAV2 and so on), if I make selection per second displays show values according with selection.
from xpanel.
norberttak
commented on August 24, 2024
I found the error in my code. It is working now on my Ubuntu 22.04 as well.
Please test this version
from xpanel.
CyberGuerro
commented on August 24, 2024
Yess, now all works like expected.
I close the issue.
from xpanel.
Related Issues (20)
- [enhancement] Add "." (dot) symbol to radio display HOT 2
- [BUG] plugin doesen't recognize "min_char_count" parameter HOT 3
- [BUG] board-config.ini path needs to query from XPlane system
- [BUG] Negative number display doesn't work
- Add HW IO get/set functions to lua interface
- Allow all switches to be used as selector in multipurpose display configuration
- Add detailed installation instruction to the documentation HOT 1
- Consolidate file naming
- Question if XPanel could be used for communicating with my generic hidapi boards? HOT 55
- [BUG] FIP device button state logs are flood the log
- [BUG] array type dataref parser error HOT 1
- [BUG] Clean up on start a new flight
- [BUG] LuaHelper::get_commandref calls XPLMFindCommand every time
- [BUG] invalid log level option: "ERROR"
- [BUG] multiple datatype not managed HOT 6
- [BUG] Missing device crash the plugin and X-Plane HOT 2
- [BUG] hid_send_feature_report error on Gentoo Linux HOT 58
- [BUG] Build error for fip HOT 1
- [BUG] Multiple instances of same type HID devices are messed up HOT 11
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from xpanel.