Request failed with status code 504 about nightscout-connect HOT 10 OPEN

Please be careful you are testing the right branch: #19. Hope this helps.

I tried the branch that you indicated but I got the same result
Thanks!

from nightscout-connect.

Fantastic. @nfontan, if you do mkdir logs that error will go away, and you can view all the http traffic between you and carelink in the results as json. It tried to write the log file, but the logs subdirectory doesn't exist.

from nightscout-connect.

same thing here, I'm getting the 504 error. @nfontan did you find anything to fix it?

from nightscout-connect.

Please be careful you are testing the right branch: #19. Hope this helps.

from nightscout-connect.

@nfontan Ok, in your case, you might need to stop/shutdown any software using a connection to carelink for 10 - 20 minutes before retrying. Or triple check the country code is correct (lowercase), and username and password are good.

from nightscout-connect.

I see, Medtronic appears to be blocking Nightscout in Europe. Please generate complaints to your local regulatory and Medtronic representatives. We need to get in touch with the decision makers at Medtronic.
nightscout/minimed-connect-to-nightscout#46 (comment)
I have to wonder if Medtronic's behavior is considered legal in Europe.

from nightscout-connect.

I updated the branch to send the information about Nightscout in the x-powered--by header. Please try again. :-)

from nightscout-connect.

I updated the branch to send the information about Nightscout in the x-powered--by header. Please try again. :-)

Now it works!
I'm running nighscout-connect locally pointing to a nighscout site hosted at northflank.com
The execution ended with an error but the data uploaded correctly

Nighscout site:
https://night--last-bait--wlvq7q7mdhmz.code.run/

I have pending to execute nighscout-connect directly in northflank to finish the tests

from nightscout-connect.

Released, and in nightscout dev, which should make testing easier.

from nightscout-connect.

Released, and in nightscout dev, which should make testing easier.

@bewest
Hi Ben,
Sorry for the delay, I'm already testing the dev branch directly at northflank.com and everything seems to work correctly.
The nighscout_connect module is running directly in the cloud and the data is loaded correctly.

I only notice a difference. When I send the data from my local PC, it was loaded with all the information, but when it runs directly in the cloud, the data is limited.

I keep you up to date with the news

Thanks!

from nightscout-connect.