Comments (12)
Hi, thats unrelated to newflasher. Your device is currently in fastboot mode, you need to enter your device info flash mode, to do that press and hold volumedown button while connecting usb cable.
from newflasher.
hi, that does not work on my XZ, I get the exact same error, it shows a green light, not blue.
from newflasher.
Green light is indication for flash mode while blue light is indication for fastboot mode, at least on my xperia 10. Just to edit my post above, fastboot mode is while holding volumeup & at the same time connect usb cable while holding volume up. Flash mode is when holding volumedown & at the same time connect usb cable while holding volume down. If nothing work it might be isue or missing usb or flash driver. In that case check your device mannager for drivers status.
from newflasher.
from newflasher.
Thats not newflasher isue since you have vid 0x0fce and pid 0x0dde:
Bus 003 Device 009: ID 0fce:0dde Sony Ericsson Mobile Communications AB Xperia Mini Pro Bootloader
indication for fastboot mode which mean your device when you press volume down and connect usb cable didn't enter into flash mode, instead it enter into fastboot mode. It might be device problem and it might be also flash driver (gordongate usb driver) problem. Newflasher to work need pid 0xb00b, pid 0xb00b is indication for flashmode, newflasher can't work in fastboot mode so it give you error No usb device with vid:0x0fce pid:0xb00b !
from newflasher.
from newflasher.
Which vid and pid you getting?
from newflasher.
Hi,
This is the relevant line from lsusb output (volume down at plugin):
Bus 001 Device 046: ID 0fce:adde Sony Ericsson Mobile Communications AB C2005 (Xperia M dual) in service mode
in fastboot mode (volume up at plugin):
Bus 001 Device 047: ID 0fce:0dde Sony Ericsson Mobile Communications AB Xperia Mini Pro Bootloader
from newflasher.
Newflasher can't be used on xperia M. Pid 0xadde is old s1 protocol used in xperia go for example, you should try xflasher https://forum.xda-developers.com/crossdevice-dev/sony/dev-xflasher-command-line-flasher-t2986634 , do in mind it might brick your device, I didn't remember which device have problem with xflasher, mediatek probably, search xda before you use xflasher!
from newflasher.
hi,
Thanks, it's an Xperia XZ, maybe 2016. I didn't know it was incompatible, thanks.
And thanks for your work :)!
greetings
Vincent
from newflasher.
I have the same issue:
cannot open /dev/bus/usb/004/002 for writing
cannot open /dev/bus/usb/004/001 for writing
cannot open /dev/bus/usb/003/001 for writing
cannot open /dev/bus/usb/002/001 for writing
cannot open /dev/bus/usb/001/004 for writing
cannot open /dev/bus/usb/001/003 for writing
cannot open /dev/bus/usb/001/002 for writing
cannot open /dev/bus/usb/001/001 for writing
No usb device with vid:0x0fce pid:0xb00b !
I'm trying to flash an Xperia X (2016), but I get the same line when I do lsusb with the device in flash mode (volume down, green light!):
Bus 001 Device 005: ID 0fce:adde Sony Ericsson Mobile Communications AB C2005 (Xperia M dual) in service mode
from newflasher.
I'm allready explined here, just read it. Not newflasher isue! Pid 0xadde is old s1 protocol used in xperia go for example, you should try xflasher https://forum.xda-developers.com/crossdevice-dev/sony/dev-xflasher-command-line-flasher-t2986634 , do in mind it might brick your device, I didn't remember which device have problem with xflasher, mediatek probably, search xda before you use xflasher!
from newflasher.
Related Issues (20)
- Hi, I have some problem when I flash my phone ,could you help me? HOT 2
- ERROR: Error CreateFile! failed with error code 5 as follows: HOT 1
- 'libusb.h' file not found (on M1 Macs) HOT 1
- Protocol error HOT 33
- Has chosen to skip userdata but userdata.sin is still flashed HOT 3
- Xperia 1 III(XQ-BC72) baseband lost HOT 1
- Support to switch between slots HOT 3
- libusb problems on M1 mac HOT 1
- pre-compiled arm builds does not flash on Raspberry Pi 4 HOT 4
- Can't flash a second hand xperia 10 iii HOT 4
- Add support for command line options HOT 1
- Xperia 1 III (XQ-BC72) flash failed HOT 3
- Newflasher stucks on MacOS Ventura with M1 HOT 1
- Flashing custom ROMs (or TWRP) HOT 1
- No usb device with vid:0x0fce pid:0xb00b tried bootloader,fastboot,recovery HOT 12
- Allow custom PID and VID HOT 1
- Can't compile into an exe using mingw HOT 2
- I/O issue when finishing flashing HOT 1
- Newflasher HOT 1
- Allow flashing global firmwares on Docomo model Xperias HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from newflasher.