schematic for wemos d1 mini? about esp8266_artnetnode_v2 HOT 3 OPEN

Feel free to email me at [email protected]. I can definitely send you a schematic for a D1 mini.

In response to your other questions:

• The module you've linked, the side with DI DE RE RO, is the side for the ESP. The other side, which is labelled GND A B VCC is the side for DMX.
• In the schematic you've attached, the pixels are driven using the IO2 (for port B) and TX (for port 1). Be careful not to enable DMX output on these pins, however, as this could damage your WS2812B LEDs. I'd recommend using the convert_max485_to_pix.png schematic linked here as an extra safety feature.
• No, it is not possible to receive DMX and then convert it to pixels. You can only use it to output pixel data. Can I suggest you look at the WLED project for that? Linked here.

I have unofficially taken over this project, as Matt seems to be offline / not contributing to this project anymore. We sell a version of this project on our website: expanseelectronics.com, and you are free to send us an email at any time with any further questions.

from esp8266_artnetnode_v2.

Thank you for your response!

from esp8266_artnetnode_v2.