External Power Source Cannot be used in the Energy Panel about e3dc-homeassistant HOT 3 CLOSED

Hello! Yes, I already implemented something like that. I did not realize the same sensor name "e3dc_external_power" could be used for both sensors, so I created a new one called e3dc_external_solar_power, since that corresponds to my use case. Otherwise it's identical, and I can confirm it works. I was able to add the integrator to the energy panel after that (in my case I had to change the integrator as well). From: Julian Altmann ***@***.***> Sent: Monday, August 21, 2023 11:33 AM To: MrIceman11/e3dc-homeassistant ***@***.***> Cc: Brian von Gunten ***@***.***>; Author ***@***.***> Subject: Re: [MrIceman11/e3dc-homeassistant] External Power Source Cannot be used in the Energy Panel (Issue #9) Hi, here is the code to convert. Could you test it if it works? Just paste the code into the sensors.yaml file. - platform: template sensors: e3dc_external_power: friendly_name: E3DC External Power unit_of_measurement: W value_template: > {{ states('sensor.e3dc_external_power') | float | abs }} - Reply to this email directly, view it on GitHub<#9 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABYIHYVMBOECI5NTEFUFBTTXWMTLHANCNFSM6AAAAAA3XOI4VI>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>> This email message together with its attachments, if any, is confidential. If you are not the intended recipient or have received this email in error, please inform us immediately and delete this message. Any unauthorized copying of this message (and attachments) or unauthorized distribution of the information contained herein is prohibited. Privacy Policy Disclaimer: Speedgoat GmbH protects your personal data. Please refer to our privacy policy<https://www.speedgoat.com/privacy> for more information.