Cannot open virtual display Driver Control UI and not dectect Virtual虚拟显示器检察不到以及virtual display Driver Control UI面板打不开 about virtual-display-rs HOT 6 CLOSED

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works
设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

from virtual-display-rs.

Is your driver running properly?

To be clear, this is not an error in the app. This means your driver is not running and able to receive the connection, so the app can't connect to it

from virtual-display-rs.

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works 设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

@ZhiShengYuan

Thanks for shedding some light on it!

Could be a bug with the installer, but I haven't been able to reproduce this. If anyone can provide some steps to reproduce and recreate the problem, that'd be helpful! In the very worst case where it can't be easily solved, I can at the very least add this to the troubleshooting steps so it becomes obvious.

By the way, just as an added note. The driver does not require a reboot to start working (or was that part of your steps to reproduce?)

from virtual-display-rs.

It's probably safe to say this is caused by #49 . Closing in favor of tracking in #49 . Please comment there if there is any information on how to reproduce this. Thanks!

from virtual-display-rs.

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works 设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

Hi,I can`t find the .msi file follow the md,then how can I install it?

from virtual-display-rs.

try to install the driver in the Device manager, then reboot and open the device manager again, if you see two virtual display,then remove one and disable&enable another,it should works 设备管理器手动load一下驱动然后重启，并且检查设备管理器看看是不是有俩vd，是的话删除一个禁用/启用另一个

Hi,I can`t find the .msi file follow the md,then how can I install it?

consider download from here
https://github.com/MolotovCherry/virtual-display-rs/releases/tag/v0.3.1

from virtual-display-rs.