mekecnc Goto Github PK

335x-b4

335x linux4.1 for b4

aq_flight_control

Fork of Bill Nesbitt's AutoQuad Multicopter Flight Controller firmware

arduino

Educ portable version of Arduino IDE 1.8.5, with libraries special Education : for Scratch 2, specific shield, robots, Blockly@rduino

arduino_core_stm32

STM32 core support for Arduino

arduino_stm32

Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards

ardupilot

Emlid's port of ArduPilot for Navio/Navio+/Navio2.

autoquad

Automatically exported from code.google.com/p/autoquad

bcnc

GRBL CNC command sender, autoleveler and g-code editor

betaflight

Open Source Flight Controller Firmware

blockly

The web-based visual programming editor.

blunom3

btt_skr_13_14_14t_sd-dfu-bootloader

This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TURBO to fix the high pitch sound coming out of the CR10_STOCKDISPLAY it is located on the bootloder_bin/compiled_bootloader_bin/ directory.

candle

GRBL controller application with G-Code visualizer written in Qt.

cirqwizard

Gerber to GCode converter and much more

coil64

Coil64 is inductance coil calculator, that allows to calculate the single-layer and multi-layer air core inductors, the ferrite toroid inductors or chokes, planar coils on PCB etc.

component-tester-v-i-curve-tracer

you can use Component-Tester to learn about the behavior of the components and semiconductors.

core

grblHAL core code and master Wiki

debian_kernel

Debian Kernel source for Tinker Board

dso203

attempt to restore buildability of Wildcat's DSO203 oscilloscope firmware + bugfixes

esc32

Automatically exported from code.google.com/p/esc32

esc32-1

Automatically exported from code.google.com/p/esc32

esc32-2

esp32controller

ESP32-based 3D printer controller

etcher

Flash OS images to SD cards & USB drives, safely and easily.

ext-switchev-iso15118

Implementation of the ISO 15118 Communication Protocol (-2, -20, -8)

fluidnc

The next generation of motion control firmware

gpio_lib_c

grbl-mega

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

grbl-mega-1

grblcontroller

Compact android mobile application for gcode streaming and controlling a cnc machine with grbl firmware