It doesn't work on the lib umqtt from micropython about umqttbroker HOT 4 OPEN

It's weird, I just try to turn on the AP mode and I connect to the AP from esp8266, I set the broker server as same as the gateway 192.168.4.1, since also the monitor tells "AP started
, IP address: 192.168.4.1, Starting MQTT broker " , but the mqtt client can't connect the mqtt server. However, I start this esp8266 without AP mode and connect a router, and my mqtt client connected a same router , I set broker server IP just like esp8266's IP in the router, all of sudden, the mqtt client just connected the mqtt server. Jesus, why?

Oh, when I use two iPhones connected the esp8266 with AP mode, I've tested with MQTTool, it's fine.

So I believe this is a big bug.

from umqttbroker.

Figure out! No problem now!

from umqttbroker.

So you have solved it?

from umqttbroker.

Yeah, problem solved, anyway I think it's a little compatible issue between micropython and arduino, your code is working fine, thanks Martin.

from umqttbroker.