How to set you up? about fan2go HOT 6 CLOSED

Hmm looks like fan2go cannot read the RPM of the fan, does the fan connector and the fan itself support it? Can you see RPM values when running sensors?

from fan2go.

sensors

asus-isa-0000
Adapter: ISA adapter
cpu_fan:     2100 RPM
temp1:        +45.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +48.0°C  (high = +87.0°C, crit = +105.0°C)
Core 0:        +48.0°C  (high = +87.0°C, crit = +105.0°C)
Core 1:        +47.0°C  (high = +87.0°C, crit = +105.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +45.0°C  (crit = +108.0°C)

does the fan connector and the fan itself support it?

Don't know how can I check it?

from fan2go.

If you run fan2go detect then everything shows, but it is enough to run sudo fan2go and everything is empty again. The sensors command now shows:

asus-isa-0000
Adapter: ISA adapter
cpu_fan:          N/A
temp1:        +53.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +54.0°C  (high = +87.0°C, crit = +105.0°C)
Core 0:        +54.0°C  (high = +87.0°C, crit = +105.0°C)
Core 1:        +54.0°C  (high = +87.0°C, crit = +105.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +53.0°C  (crit = +108.0°C)

from fan2go.

I guess something goes wrong when fan2go tries to set the pwm_enable value, but the error is not logged correctly :( I will try to make some adjustments surrounding this.

from fan2go.

@z36r2850o I have made some changes for #116 as well, can you retest?

from fan2go.

I am closing this because of inactivity. Feel free to reopen if necessary :)

from fan2go.