Fingerprint update request _TZ3000_cfnprab5/TS011F about edge-drivers-beta HOT 14 CLOSED

Hi Ian
Do the 4 switches shown work independently for you?

I was trying to fix it and it was impossible, I couldn't find the reason why they all turn on and off at the same time.

I don't have access to the CLI now, a couple of days I will.

with what you tell me I do it

from edge-drivers-beta.

Hi Mariano,

sorry, I did not explain very clearly. This is the Zigbee powerboard image: https://www.aliexpress.com/i/4000504463608.html

The four existing switches for the four power outlets all work correctly (each works independetly of each other).

I just need you to add one more switch. This will switch the four USB outlets. There board has only one endpoint that controls all four USB outlets.

Thank you in advance.
Ian

from edge-drivers-beta.

I'm glad they work independently.
A few days ago to another user all switches worked at the same time and I left it as impossible.
https://community.smartthings.com/t/beta-zigbee-edge-driver-compatible-with-lidl-ecosmart-osram-smartthings-others/231689/2317?u=mariano_colmenarejo

I will add the 5th switch as son is posible and you try it

from edge-drivers-beta.

Hi Ian

could You try with this driver version from my shared channel?

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Multi Switch Mc               │
│ Version     │ 2022-09-16T12:03:16.744889996        │
└─────────────┴──────────────────────────────────────┘

from edge-drivers-beta.

Hi Mariano,

thanks, that works great. All 5 outlets are switchable independently.

One question: Is it possible to edit the name of the Switch-2, Switch-3 etc? I would like to change them to TV, DVD, etc

from edge-drivers-beta.

Sorry, user can not change the labels of the components.
It has been requested and I don't know if they will

from edge-drivers-beta.

Thanks

from edge-drivers-beta.

Can you also add the following:

Manufacturer:

• _TYZB01_vkwryfdr
  Model:
• TS0115

This is physically identical to the device above. It has 4 power outlets and 1 USB.

However, when I built the Groovy DTH, the USB endpoint is 7.

i.e.
EP1 = Power outlet
EP2 = Power outlet
EP3 = Power outlet
EP4 = Power outlet
EP7 = USB outlets

Thanks
Ian

from edge-drivers-beta.

I need to see the clusters list to match the profile

from edge-drivers-beta.

Hi Mariano,

here are the clusters:

Thanks

from edge-drivers-beta.

Hi

Give me some time I am modifying this driver to add other functions

from edge-drivers-beta.

Hi

Added to this driver version

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Multi Switch Mc               │
│ Version     │ 2022-09-22T21:13:14.703540351        │
└─────────────┴──────────────────────────────────────┘

and this other driver with childs devices

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Multi Switch and Childs Mc    │
│ Version     │ 2022-09-22T21:13:20.327906873        │
└─────────────┴──────────────────────────────────────┘

  - id: "TS0115/_TYZB01_vkwryfdr"
    deviceLabel: TS0115 Switch
    manufacturer: _TYZB01_vkwryfdr
    model: TS0115
    deviceProfileName: five-outlet

from edge-drivers-beta.

Hi Mariano,

thanks for adding TS0115/_TYZB01_vkwryfdr.

The 4 outlets (Main, switch2, switch3, switch4) = EP1, EP2, EP3, EP4 are working fine.
The USB (switch5) is not working. This is EP7 (not EP5 which is more logical).

Can you please check this for me.

Thanks
Ian

from edge-drivers-beta.

Hi,
sorry for delay i am very busy

Try these versions
Zigbee Multi Switch and Childs Mc allow create child devices for secondary components
───────────────────────────────────────────────────
Name Zigbee Multi Switch and Childs Mc
Version 2022-09-28T13:01:30.939212533
───────────────────────────────────────────────────
───────────────────────────────────────────────────
Name Zigbee Multi Switch Mc
Version 2022-09-28T13:01:42.097082798
───────────────────────────────────────────────────

from edge-drivers-beta.