madworm Goto Github PK

8x8_rgb_led_matrix_controller

LAYOUT FILES: 8x8-RGB-LED-Matrix controller using 4x 74HC595 shift registers. CPU: ATmega168/328. Arduino 'compatible'. Runs with code from 'V3_x_boards_test' repo. KICAD and Gerber files.

arduino---code--blocks

CODE: Compling the 'core.a' file for your architecture + compiling 'normal' code. This assumes you have a working avr-gcc, avr-libc and the avr-binutils installed! This is intended to run on linux.

attiny_projects

CODE: various things for ATtiny micro-controllers.

avr-isp_level-shifter

LAYOUT FILES: Bidirectional level-shifter for old 5V-only AVR-ISP programmers

avr-isp_pogo-plug_1.27mm

LAYOUT FILES: AVR-ISP adapter: 6pin (2.54mm) --> 6pin pogo-pins (1.27mm).

avrispmkii_lufa

CODE: LUFA / avrispmkII modification for easy linux/windows usage.

bluetooth.pretty

LAYOUT FILES: KiCad footprints for various Bluetooth modules

capacitors.pretty

LAYOUT FILES: KiCad footprints for various SMD capacitors.

capacitors_smd.pretty

capsense

LAYOUT FILES: Capacitive sensing experiments.

coat-button

LAYOUT FILES: Sewable blinky button for coats.

dc-dc-modules.pretty

LAYOUT FILES: KiCad footprints for various DC-DC modules.

dil-headers.pretty

LAYOUT FILES: KiCad footprints for DIL headers

dso_teaser

CODE + a little bit of hardware to test DSOs.

freerouting

FreeRouting interactive push & shove router

freerouting-1

Yet another copy of the original freerouting.net source

fuses-polyswitch.pretty

LAYOUT FILES: KiCad footprints for various polyswitch fuses.

garfield

heatsinks.pretty

LAYOUT FILES: KiCad footprints for various heatsinks.

high-density-proto-board

LAYOUT FILES: Bread-board like proto-board with 1.27mm raster (50mil).

ikea-samtid_mood-light

LAYOUT FILES: Circular extension board for IKEA Samtid lamps.

ikea-samtid_mood-light_fw

CODE: Circular extension board for IKEA Samtid lamps.

ikea-samtid_reading-light

LAYOUT FILES: Circuit board to go between the movable beams of the Samtid lamp.

ir_raw_receiver

LAYOUT FILES: 38kHz IR receiver using ATtiny85 + TSOP38238

ir_remote

CODE: Arduino code for (xx8 chips). Receive raw IR signals with a demodulating IR sensor using a pin-change interrupt.

kicad-footprints.pretty

LAYOUT FILES: KiCad footprints for various parts.

kicad-logos

Logos and other potentially useful graphical elements for KiCad

kicad-stuff

Various things to make working with KiCad easier. Most likely Linux centric.

kis-3r33s_breakout

- see title -

kitchen_lights

LAYOUT FILES: ATtiny24 (pre v1.10) / ATtiny2313 + MBI5168 controlled lamp with 32x superflux-class LEDs. Under heavy development --> unsafe to use!