Experimenting with Charger Card about sungrow-wallbox-modbus-homeassistant HOT 7 OPEN

@btota: Could you upload the image \local\sungrow_wb_bl.png ?

of course!

from sungrow-wallbox-modbus-homeassistant.

That looks pretty good! I will try to implement it too as soon as I have a bit more time.
Can you tell me what is missing/not working currently?

A bit off topic:

1. I have problems with the charging start and end time, they have an offset of -7 hours. The offset is in HA and also in the iCloudSolar app. Do you know, if it is possible to set the timezone within the wallbox? As an alternative, I could define an offset in the HA config, but thats seems not correct to me.
2. Do ypu know what I have to do, to start the charging? Like the button "Ladevorgang starten" in the iCloudSolar app? I know I can stop the charging with "Remote Contol" -> "Stop charging", but it doesn't with "Start charing"
   ...I can open seperate issues for that if you like.

from sungrow-wallbox-modbus-homeassistant.

1. Yes. You can set systemtime in winet-s
   

As I mentioned #6 (comment) before, within "as_local" I got an offset of +1 hour.

2. I can start/stop via remote control -->input.select{Start/Stop charging}, I shortly tested yesterday on "Lademodus-->PV-Überschuss Laden" in ISC:
   bugs:
   #HA/Android:
   ##input.select box doesn´t refresh status, like you'll need to manually select and reselect objects in dropdownlist, maybe this helps you on your start/stop issue.
   ##Charger enable/disable: enable doen´t work, if selecting disable before --> needs action on ISC/app to re-enable WB.
   ##Phase switch single/three phase: no action on changing phases
   ##Set output current: no action on changing ...A
   ...

Charger Card (in process ...):

works: reading values from modbus
not working: Toggling start/stop, set current output, etc
template #12 (comment): needs adaption to sungrow

some impressions:

from sungrow-wallbox-modbus-homeassistant.

1:
I cross-check my datetime settings in the dongle:

and also via ModBus cli directly on the wallbox:

that seems correct for me.
HA is the following:

2:
I am able to stop charging with the remote control input selector, but not to start it (charging mode in the iCloudSolar app is set to fast charging). I guess I have to drive more often, to have more opportunities to test it ;-)

from sungrow-wallbox-modbus-homeassistant.

@btota: Could you upload the image \local\sungrow_wb_bl.png ?

from sungrow-wallbox-modbus-homeassistant.

1. it looks good, is there another place in the ISC where the time can be set?
2. I just saw in ISC charging report, that the last charging (maybe more) triggered from HA, wasn´t record?!

from sungrow-wallbox-modbus-homeassistant.

You will find my last status of the charger-card here:
https://github.com/SunnyCrockett/Sungrow-SHx-Inverter-Modbus-Home-Assistant/tree/main/dashboards/HACS_Charger

from sungrow-wallbox-modbus-homeassistant.