Comments (4)
@Foadsf, you are right gears seldom come alone! I suspect them to usually appear at least in pairs or even larger numbers.
I am just newly delving into Gear design in order to re-construct the mechanism of an medieval astronomical clock from the city hall of Ulm. This shall serve as a more complex example for what might be required from a feature request for a complete gear box.
I have setup the following initial set of gears to cover the basic functionality but I am unable to complete the gears for at least the following features missing:
-
the clock contains several gears which are rotating around the same axis, but which are not locked to the same spindle.
You can see the following two schematics drawings from the following page for the general layout of the gear set.
http://www.astrouhr.telebus.de/technik/ZeigerschemaAstroUhrUlm.gif
http://www.astrouhr.telebus.de/technik/AstrogetriebeUlmSkizze_Schmitt2_1000x800.gif
It requires to align the intermediate/surrounding spindles so that the center of the axis of the main spindles driving the clock handles i.e. spindles D, E-F, W-H, G, Q, O-N are all pivoting around the same point.
It would require to modify the angle and/or radius/diameter of adjacent gears to match the necessary gaps/distances probably resulting in some float values for connection angles and/or diameter/radius of the gears. -
allow the axis to be fixated on some other gear plate to allow so called differential gears.
I understand that the three dimensional driving gears of the clock are using bevel gears, which is strictly off limits for the 2D layout algorithm implemented at geargenerator. But apart from that it also includes a so called differential gear in 2D (see axis P and L-M, which both are fixated on the main gear G and are driving together - in different directions - the two final axis Q and O-N). -
There are some worm gears that only have one tooth per rotation according to the first diagram above.
I still have to check the live model being exhibited in the city of Ulm townhall for the actual driving gear of S-T, U, V, W-H.
The photographs from the student model displayed on the above homepage may not be detailled enough to understand the mechanism.
http://www.astrouhr.telebus.de/modell/modell.html -
for an easier matching between the drawing schematics given on the above pages I would like to give each gear, spindle or axis a descriptive name.
This would be both a name (e.g. simply the letters given in the schematics) plus some possibly longer description what the respective handle should be showing. -
the geargenerator.com adds a label for each gear, including the gear #, number of teeth N, pitch diameter D, diametral pitch P and pressure angle PA plus some gear guide lines including the pitch and other diameter guide lines and the principal tooth indicating the connection surface with the adjacent gear.
-
it allows animation of the gear box by simulating the rotation of the first gear and rotating the connected gears likewise.
Maybe it would be sufficient to incorporate a 2D spur gear layout algorithm first and add 3D bevel / worm gears later maybe even with another separate feature / issue request.
from freecad.gears.
+1
from freecad.gears.
I wonder when you get tired of pumping? or is this your job? ; ).
from freecad.gears.
Sorry. I see it as planting seeds and hoping they grow
from freecad.gears.
Related Issues (20)
- Eccentrically Cycloidal Gears
- Calculating root of bevel gear with clearance > 0 HOT 4
- Create a helical involute gear on an existing shaft HOT 3
- combine two gears does not work with double helix gears
- Cannot calculate pitch angle in bevelgear
- Unable to install FCGear in FreeCAD v0.19
- worm wheel
- Crash with older files without newer properties HOT 2
- Construct Sprocket wheels by distance?
- Proper integration of connected gears into the project tree HOT 1
- Deleting a gear connector spills some errors in the log HOT 1
- Enveloping worm gear HOT 5
- When you make a double helix, the full value does not come HOT 3
- Addon Manager uses outdated develop branch
- No gear_parameters after creating a gear HOT 5
- Failed to install freecad.gears HOT 2
- Massive issues with Involute Gears HOT 1
- Using thornton cutters and measurments HOT 2
- Error when saving file with gear HOT 16
- `What's this?` command opens wrong wiki article url HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from freecad.gears.