librespot and firewall ports about librespot HOT 5 CLOSED

Comment by plietar
Tuesday Jul 05, 2016 at 18:23 GMT

(Just to confirm, does non-discovery authentication work ?)

The 404 is normal, does http://XXX.XXX.XXX.XXX:38143/?action=getInfo work ?

Here's my educated guess at the issue.
Discovery uses mDNS, which normally relies on multicast UDP on port 5353.

However Spotify has it's own implementation which uses unicast instead (if a Spotify engineer reads this, fyi this goes against the RFC)

Your router is probably letting multicast through but not unicast, which explains why avahi-browse works.

I don't think the client uses a fixed UDP port to receive packets, though you could fire up wireshark to check.

Does your firewall let you filter packets by source IP/port ?
Port 5353 from the Pi is where the packets come from.

Let me know if this helps !

from librespot.

Comment by plietar
Tuesday Jul 05, 2016 at 18:29 GMT

Do you have access to an iOS device? I think Spotify uses Apple's implementation of mDNS on there, which appropriately uses multicast. If it works it would confirm my suspicions.

from librespot.

Comment by giannello
Tuesday Jul 05, 2016 at 19:02 GMT

Non-discovery auth: not tested, will give it a try.
The 404 doesn't bother me that much, was just a way to confirm that librespotify is receiving and responding to packets coming from the LAN, and it does.

The firewall allows all UDP packets with destination port 5353 to flow in both directions. I don't have an iOS device to verify, will try to get my hands on one of them in the next days.
Keep in mind that, using separate subnets, the firewall has avahi-daemon working as reflector.

I'll run some more tests to try to pinpoint the issue. In the meantime I just moved the raspberrypi to the LAN and everything works fine - thanks for this amazing piece of software :)

from librespot.

@giannello Did you get anywhere with this?

from librespot.

Since the zero-config port addition and the fact that this is an environment issue, I'm going to close this. If you need any more help let us know.

from librespot.