Comments (8)
I built the latest code (8d5b4be). Then flash the firmware to D1.
To make sure D1 is in WIFI AP Mode, type ifconfig in console
wlan0 Link encap:Ethernet HWaddr 00:E1:40:24:25:93
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:200 errors:0 dropped:90 overruns:0 frame:0
TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25607 (25.0 KiB) TX bytes:14198 (13.8 KiB)
Then I switching it to WIFI Client mode, type ifconfig in console.
wlan0 Link encap:Ethernet HWaddr 00:E1:40:24:25:93
inet addr:10.0.0.5 Bcast:255.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1614 (1.5 KiB) TX bytes:1325 (1.2 KiB)
Seems OK.
from lamobo-d1.
I couldn't setup wireless access too. Looks like my rtl8188eu chip revision does not work with 8188eu.ko
kernel module. There's now a staging driver on mainline kernel for rtl8188eu which works, but I couldn't compile it targeting this repository kernel. Any clue about this?
dmesg
info from mainline kernel when plugging USB wireless dongle:
[697992.785993] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[697992.951030] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[697994.193423] r8188eu 3-1:1.0 wlp0s20u1: renamed from wlan0
from lamobo-d1.
I am also facing the same issue, the camera is not showing any SSID. i tried 3 different USB WiFi dongle but no luck. Not sure where to look for help. Very poor documentation.
Thanks
Brijesh
from lamobo-d1.
What firmware version are you using?
Try flashing the latest.
On 3 Sep 2016 17:26, "bmishra4" [email protected] wrote:
I am also facing the same issue, the camera is not showing any SSID. i
tried 3 different USB WiFi dongle but no luck. Not sure where to look for
help. Very poor documentation.Thanks
Brijesh—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
#1 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AGH9dUDAYyu4u_IpM0WPuXumXYwSuPT8ks5qmYONgaJpZM4DrcEY
.
from lamobo-d1.
Although my post is almost a year and a half old, I am still having this issue, the units I own are now living in a drawer.
from lamobo-d1.
Just to make sure, do you aware of the fact that the USB sockets are not
identical? One of them is for power only, and won't work as a USB OTG.
On 4 Sep 2016 06:40, "Daniel Blair" [email protected] wrote:
Although my post is almost a year and a half old, I am still having this
issue, the units I own are now living in a drawer.—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#1 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AGH9dQ3eZaFeW4x_C4Rj-FPqDedILG0Gks5qmj2mgaJpZM4DrcEY
.
from lamobo-d1.
I am following the exact procedure in the documentations to connect it through AP mode. But no AP is available to connect with. If you want I can send you a video of my procedure. Something is wrong with the board or the documentation.
I need immediate help, else will open a dispute case with seller for selling faulty board.
Thanks
Brijesh
from lamobo-d1.
Sorry to hear that.
If you have a link to the video, I'll watch it and try to help.
On 4 Sep 2016 11:58, "bmishra4" [email protected] wrote:
I am following the exact procedure in the documentations to connect it
through AP mode. But no AP is available to connect with. If you want I can
send you a video of my procedure. Something is wrong with the board or the
documentation.I need immediate help, else will open a dispute case with seller for
selling faulty board.
Thanks
Brijesh—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#1 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AGH9dbpQ2-iZL5Fnj2l8yHvYh8gR-gSYks5qmog5gaJpZM4DrcEY
.
from lamobo-d1.
Related Issues (17)
- Need Help On compile kernel with openvpn modules in kernel HOT 3
- default with RTC driver and hwclock...; HOT 8
- 3G/ 4G modem connect HOT 2
- 更改工作模式 HOT 2
- SDIO use HOT 1
- rtl8152
- stuck at massboot HOT 7
- Qemu emulation
- URL for streaming from Anyka IP Camera
- anyka default username/password HOT 3
- VFS: Cannot open root device HOT 2
- Cannot connect to my ap HOT 3
- Bug in record_video sample HOT 6
- Video quality issue in firmware ver 3.0
- AK ISP Tool
- Windows 10 HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from lamobo-d1.