a simple ai on openwrt platform instalation imformation can be found here https://forum.openwrt.org/t/openwrtai-with-internet-radio-and-local-media/

it can be a very simple private AI with manual trigger for listening ( i use a zigbee switch via domoticz) it can be install on multiple platforms thought it was designed specifically for openwrt and it particular pacularities it has support for multiple room via 5.1 or 7.1 audio devices each port can be audio output for seperate rooms . you can have a zigbee switch in each room and audigate switch that point the mic to that specific room for play back in that room or the entire house

it written in bash and is extremely quick and responsive especially if using online speech reconignition and flite ( verus gtts) if using on non openwrt device just edit the chroot section to point to a local version of mplayer, vlc and flite it also has fussy logic capablity, specifically used on the ebook section- as long as you are realitively close with your book title or unuciation it should bring up the correct book for basic install with out the more complex options you just need to install SpeechRecognition, gtts and levenshtein and use mpg123 compatable radio stream

pip install SpeechRecognition

for open wrt follow this then install SpeechRecognition

opkg install git
opkg install alsa-utils
opkg install alsa-lib
opkg install portaudio
opkg install ar
opkg install python3-dev
# Make a working directory
mkdir /opt/tmp/
cd /opt/tmp
# Fetch PyAudio source
git clone https://people.csail.mit.edu/hubert/git/pyaudio.git
# Fetch portaudio.h (required for the build)
cd /opt/tmp/pyaudio/src
wget https://raw.githubusercontent.com/EddieRingle/portaudio/master/include/portaudio.h
# build away!
cd /opt/tmp/pyaudio
python setup.py build
python setup.py install
# done

compile flac

opkg install gcc make 
wget https://github.com/xiph/flac/releases/download/1.3.4/flac-1.3.4.tar.xz -O flac.tar.xz
tar -xvf fac.tar.xz
cd flac
chmod +x configure
./configure
make 
make install  # but it installs to /usr/local/bin  just copy flac to /usr/bin afterwards  or manually do it from the build dir

install gtts

# pip install gTTS
# opkg install mpg123

and install fuzzy logic

git clone https://github.com/rbm78bln/levenshtein.git
make 
cp levenshtein exec to /bin

and you are off and running

openwrtAI is the main executable