sensor.kwh_to_home shows zero about hass-sunpower HOT 1 CLOSED

Try looking at the data your system reports directly:
curl http://172.27.153.1/cgi-bin/dl_cgi?Command=DeviceList (or whatever host you are using)
Look for
"neg_ltea_3phsum_kwh" which is "KWH To Grid"
"pos_ltea_3phsum_kwh" which is "KWH To Home"

My Consumption meter ( PVS6M0400c ) reports
"neg_ltea_3phsum_kwh": "0",
"pos_ltea_3phsum_kwh": "12619.08",

This is the consumption of my house. I never see kwh to grid because the clamp is installed on the feed to my panel and my solar backfeeds directly into the meter (via a different breaker panel). I do see data on my 'p' meter for production though.

• The number from the website, is that produced power or consumed power? (or do you have both)
• I know some systems don't get installed with all of the current clamps so sometimes this data is zero
• check the 'P' meter it has a 'lifetime power' entity which should be the production from your panels
• Feel free to attach the output from above and we might be able to see whats happening (it does have your serial numbers in it you might want to remove)

from hass-sunpower.