Comments (11)
heythisisnate
commented on June 12, 2024
I finally got an opportunity to explore this and found that the api_password is not an issue at all. The Konnected component API endpoint is configured to not require the password. Instead, an access_token is used from your Konnected config.
You may have been confusing this with a TLS issue that is being addressed here: #63
from konnected-security.
hugodelaroza
commented on June 12, 2024
ok, thats great, but how can I generate and configure my own token?
from konnected-security.
hugodelaroza
commented on June 12, 2024
or maybe I have a token, how can I know it?
from konnected-security.
heythisisnate
commented on June 12, 2024
You just make up any random string. It is synced to the Konnected device during discovery and used from that point to authenticate.
from konnected-security.
hugodelaroza
commented on June 12, 2024
but I allready have one:
konnected:
access_token: skfn8sdfo8si54329
devices:
- id: 68c63a8a58ae
binary_sensors:
- zone: 1
type: motion
name: Pir 1 Konnected
This is my config.yaml
that else can I do?
El mié., 13 de jun. de 2018 a la(s) 21:37, Nate Clark (
[email protected]) escribió:
… You just make up any random string. It is synced to the Konnected device
during discovery and used from that point to authenticate.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aksqwnl90o-buPOTy_MCn2nQCp2tkHA2ks5t8bAvgaJpZM4UdloF>
.
--
Hugo de la Roza
from konnected-security.
rotcop4u2
commented on June 12, 2024
Is that with the indents? It should look like:
konnected:
access_token: skfn8sdfo8si54329
devices:
- id: 68c63a8a58ae
binary_sensors:
- zone: 1
type: motion
name: Pir 1 Konnected
…On Wed, Jun 13, 2018, 8:50 PM hugodelaroza ***@***.***> wrote:
but I allready have one:
konnected:
access_token: skfn8sdfo8si54329
devices:
- id: 68c63a8a58ae
binary_sensors:
- zone: 1
type: motion
name: Pir 1 Konnected
This is my config.yaml
that else can I do?
El mié., 13 de jun. de 2018 a la(s) 21:37, Nate Clark (
***@***.***) escribió:
> You just make up any random string. It is synced to the Konnected device
> during discovery and used from that point to authenticate.
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <
#62 (comment)
>,
> or mute the thread
> <
https://github.com/notifications/unsubscribe-auth/Aksqwnl90o-buPOTy_MCn2nQCp2tkHA2ks5t8bAvgaJpZM4UdloF
>
> .
>
--
Hugo de la Roza
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AkOsJobUuDzB7B-CNX34R50ZXmeNBwbPks5t8bM_gaJpZM4UdloF>
.
from konnected-security.
hugodelaroza
commented on June 12, 2024
I think it's not the indent, I get this in the serial connection:
Konnected firmware 2.2
NodeMCU 2.2.0.0 build 20180405 powered by Lua 5.1.4 on SDK 2.2.1(cfd48f3)
Heap: 39856 Initializing Konnected
Heap: 35312 Version: 2.2.0
Heap: 33688 Connecting to Wifi..
Heap: 37536 Wifi connected with IP: 192.168.0.130 255.255.255.0 192.168.0.1
Heap: 37504 UPnP: Listening for UPnP discovery
Heap: 37296 HTTP: Starting server at http://192.168.0.130:17066
Heap: 37128 Loaded: server
Heap: 32512 Initializing sensor pin: 1
Heap: 32200 Loaded: application
E:M 1048
HTTP client: Disconnected with error: 46
HTTP client: Connection timeout
Heap: 34760 HTTP Call: -1 state 1 pin 1
from konnected-security.
heythisisnate
commented on June 12, 2024
@hugodelaroza please try re-flashing the bin files from here: https://github.com/konnected-io/konnected-security/tree/homeassistant-fixes/firmware
If that doesn't fix the problem, post a new log
from konnected-security.
hugodelaroza
commented on June 12, 2024
can you tell me wich one should I flash first? or is it the same?
from konnected-security.
heythisisnate
commented on June 12, 2024
You need to flash both. They are not the same. Please follow the
instructions:
https://help.konnected.io/support/solutions/articles/32000023470-flashing-konnected-firmware-software
…On Thu, Jun 14, 2018, 8:43 AM hugodelaroza ***@***.***> wrote:
can you tell me wich one should I flash first? or is it the same?
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AAAu8GwWW6tmefwt7u_lYUQ1Zn1-lJRwks5t8lpngaJpZM4UdloF>
.
from konnected-security.
hugodelaroza
commented on June 12, 2024
NOW IT WORKS!!!!! Thank you very much!!!!
This weekend will migrate all the wires from the old alarm system to konnected!!
from konnected-security.
Related Issues (20)
- Konnected security HOT 1
- Konnected hardware support WP2 Personal (AES) or WPA3 authentication? HOT 1
- ALARM1 e ALARM2 set to LOW when ON HOT 3
- Konnected will continuously reboot if the network if offline, which makes it pointless to ever buy a Battery Backup. HOT 1
- Board cannot reach Home Assistant. No zone update. Looping 10 times and reboots. HOT 2
- Enhancement: Independently trigger output on state change HOT 11
- certificate issue with Home Assistant using LetsEncrypt HOT 1
- Lua panic when provisioning with a temperature sensor on 3.0
- Konnected Alarm Panel Reboots every 24 hours when a zone with Type: Switch is steady on for 24 hours HOT 2
- State of Zone Type: Switch is lost at reboot HOT 6
- Release 3.0.0 - Alarm Pro v2 - How do we perform a OTA upgrade of the firmware? HOT 1
- Unable to update firmware on 1st panel of Alarm V2 - keeps saying connecting HOT 5
- Firmware v3.0.1 no longer polling DS18B20 & reporting temp HOT 5
- Usage of GPIO16/D0 HOT 1
- Push notification (HomeKit) when the system has been triggered, but before the Alarm is activated? HOT 1
- Wifi drops w/ reason code 15 HOT 6
- API Enhancement: zone instead of pin identifiers
- OTA update may fail while connected to AWS IoT HOT 10
- Enhance time server settings HOT 4
- Unprotected crash/panic when REST endpoint responds with 401
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from konnected-security.