Comments (11)
jpiat
commented on August 15, 2024
In its current state I don't see how to do this. If your goal is to
increase throughput, you could use rgb LED and have up to three time the
bandwidth. You can also probably use a higher transmitter rate if you are
using a photodiode
Jonathan Piat
Le 14 févr. 2017 2:03 PM, "Jozhxy" <[email protected]> a écrit :
… Hi, I've tried out your code, works fine with x9 LEDs to photodiode at
other side.
Since Arduino UNO can't run the code in parallel. Is it possible to
combine ASK into it without modifying the circuit at few hundreds Hz or kHz
and then demodulate again?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#20>, or mute the thread
<https://github.com/notifications/unsubscribe-auth/ACNWZHTNrmKIeKBFdQ0MtePNsZ-056Juks5rcaYmgaJpZM4MAcrw>
.
from arduino.
Jozhxy
commented on August 15, 2024
Thank you for your quick respond. I found the hot spot at SYMBOL_PERIOD 2400 & changed the threshold which is still perfect square wave on the oscilloscope, unfortunately my photodiode won't detect any faster than that. But I'm glad the LED is above the threshold of human eye to perceive.
Thank you once again 👍
from arduino.
jpiat
commented on August 15, 2024
Can you give the reference for the photodiode you are using ?
Jonathan Piat
Le 14 févr. 2017 2:37 PM, "Jonathan" <[email protected]> a écrit :
… Thank you for your quick respond. I found the hot spot at SYMBOL_PERIOD
2400 & changed the threshold which is still perfect square wave on the
oscilloscope, unfortunately my photodiode won't detect any faster than
that. But I'm glad the LED is above the threshold of human eye to perceive.
Thank you once again 👍
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#20 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACNWZGfQxgVV_P4kMFhXM4scX2sZWlESks5rca4cgaJpZM4MAcrw>
.
from arduino.
Jozhxy
commented on August 15, 2024
Oh sorry, it's a phototransistor. I use a macro lens to magnify in order to improve the signal.
http://www.vishay.com/docs/81321/tept5700.pdf
Bought it from: http://my.element14.com/vishay/tept5700/photo-transistor-npn-570nm-5mm/dp/1497676
from arduino.
jpiat
commented on August 15, 2024
Nice ! I'll try to replicate your setup. Using a LED as receiver does not
work reliably.
Jonathan Piat
Le 14 févr. 2017 3:19 PM, "Jonathan" <[email protected]> a écrit :
… Oh sorry, it's a phototransistor. I use a macro lens to magnify in order
to improve the signal.
http://www.vishay.com/docs/81321/tept5700.pdf
Bought it from: http://my.element14.com/vishay/tept5700/photo-
transistor-npn-570nm-5mm/dp/1497676
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#20 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACNWZLo9IgDod5g2AbVKOJcJW7eDED72ks5rcbgNgaJpZM4MAcrw>
.
from arduino.
Jozhxy
commented on August 15, 2024
Cool.
Yea, because I need to match the wavelength with the transmitter, most receivers are at IR range.
To achieve a standard communication system, other than modulation, what else could be implement into this project? (If arduino could handle it)
from arduino.
jpiat
commented on August 15, 2024
I have a TEMT6000 on hand, i'll see if it could work. Interesting things to
implement would be :
- CRC computation (to discard incomplete frames)
- auto-sync (detect the symbol frequency)
- design an arduino shield to ease experiments (some people had trouble
with the wiring and the use of a wrong led as receiver)
- spectrum spreading (to have multiple channels)
....
2017-02-14 20:30 GMT+01:00 Jonathan <[email protected]>:
… Cool.
Yea, because I need to match the wavelength with the transmitter, most
receivers are at IR range.
To achieve a standard communication system, other than modulation, what
else could be implement into this project? (If arduino could handle it)
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#20 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/ACNWZOkSlFr5dDFDo9VkWP7LvdvWejWYks5rcgDYgaJpZM4MAcrw>
.
from arduino.
shivanksharma91
commented on August 15, 2024
@Jozhxy Can you help me with this? please [email protected]
from arduino.
Jozhxy
commented on August 15, 2024
@shivanksharma91 For this case, only IR is fast enough to modulate cuz it's the standard.
LED will dim as it doesn't have much time to stay fully on or off. There's only few that manufactures high switching LED & phototransistor/diode which are very costly.
You can use function generator as an external modulation into AND transistor or if you can code a fixed modulation frequency while sending data in Arduino, maybe extract IR library and modify it.
from arduino.
shivanksharma91
commented on August 15, 2024
@Jozhxy thanks for the quick respnse, i need help in using photodiode at receiving end. If i just replace the led with photodiode on the receiving end and upload the code, will it work? Since i cannot really understand the code, i am new to it.
from arduino.
Jozhxy
commented on August 15, 2024
The code sends out by frame, loop Hello Word 1 to 10.
Try it short distance, adjust to lower speed first in the code. Get a variable resistor to adjust photodiode sensitivity like IR receiver circuit.
See other issue posted before for further info of the code
from arduino.
Related Issues (20)
- Emitter and Receiver in one file as Transceiver? HOT 3
- License?
- How can I slow down the message transfer?
- Can these codes be uploaded onto an Arduino Nano?
- VLC on Android Phone HOT 2
- ARDUINO UNO, LED, PHOTODIODA HOT 2
- Multiple Transmitter
- Possibility of transmission in greater reach? HOT 1
- Circuit Diagram HOT 1
- Can i run the VLC code using Arduino Mega HOT 1
- Which type of Arduino nano I use to run the code
- Is it possible to increase the no of words in an sentence?
- arduino uno
- the number of characters received
- use led bulb
- code of program
- Contact
- Uu HOT 1
- which is the arduino used here??Nano or UNO HOT 3
- Connecting the components.
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from arduino.