Comments (14)
jneilliii
commented on June 15, 2024
I'll have to look into this one. I believe I know the reason, it's because the 9 didn't get stripped off the last row during the collection process. To verify, it you look in the plugin settings at the stored mesh, the last row will have a 9 in it?
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
0 +0.582 +0.472 +0.382 +0.292 +0.227 +0.152 +0.087 +0.025 -0.025 -0.083
1 +0.552 +0.427 +0.307 +0.225 +0.155 +0.082 +0.012 -0.053 -0.098 -0.128
2 +0.482 +0.377 +0.262 +0.185 +0.115 +0.052 -0.013 -0.068 -0.120 -0.173
3 +0.445 +0.315 +0.192 +0.112 +0.042 -0.023 -0.085 -0.133 -0.173 -0.193
4 +0.410 +0.300 +0.187 +0.115 +0.042 -0.023 -0.080 -0.118 -0.155 -0.205
5 +0.400 +0.270 +0.157 +0.067 -0.003 -0.063 -0.120 -0.158 -0.185 -0.208
6 +0.420 +0.295 +0.190 +0.090 +0.032 -0.025 -0.073 -0.108 -0.143 -0.198
7 +0.435 +0.300 +0.172 +0.077 +0.010 -0.040 -0.085 -0.115 -0.153 -0.183
8 +0.465 +0.357 +0.237 +0.150 +0.075 +0.025 -0.018 -0.058 -0.100 -0.170
9 +0.490 +0.305 +0.260 +0.140 +0.072 +0.045 -0.013 -0.068 -0.105 -0.138
Yep
…On Wed, Apr 25, 2018 at 3:28 PM, jneilliii ***@***.***> wrote:
I'll have to look into this one. I believe I know the reason, it's because
the 9 didn't get stripped off the last row during the collection process.
To verify, it you look in the plugin settings at the stored mesh, the last
row will have a 9 in it?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#41 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aj_7UPR95K86wm0YTqJziXk2URUKuWtIks5tsPh0gaJpZM4TkNYA>
.
from octoprint-bedlevelvisualizer.
jneilliii
commented on June 15, 2024
Can you try the 0.1.0 branch I just pushed and let me know if results are the same? Use the url below in plugin manager to install.
https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
You got it. Probably won't be until late tonight or tomorrow morning as I have a big print running right now
Sent from BlueMail
…On Apr 29, 2018, 12:25, at 12:25, jneilliii ***@***.***> wrote:
Can you try the 0.1.0 branch I just pushed and let me know if results
are the same? Use the url below in plugin manager to install.
https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip
--
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub:
#41 (comment)
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
Works great!!!
…On Sun, Apr 29, 2018 at 12:25 PM, jneilliii ***@***.***> wrote:
Can you try the 0.1.0 branch I just pushed and let me know if results are
the same? Use the url below in plugin manager to install.
https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/
archive/0.1.0.zip
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#41 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aj_7UGKlloUga6xqAJQFvhdLHHT6jlh5ks5tthOygaJpZM4TkNYA>
.
from octoprint-bedlevelvisualizer.
jneilliii
commented on June 15, 2024
Thanks. I've received reports that this version doesn't update after the first data pull, so subsequent clicks of the update button doesn't refresh the data. Was goingto look into that tonight.
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
I was just going to email you that LOL. And I'm using a 10x10 matrix, and after the first 2 rows, updating goes away and the graph pops back up
Sent from BlueMail
…On Apr 30, 2018, 10:49, at 10:49, jneilliii ***@***.***> wrote:
Thanks. I've received reports that this version doesn't update after
the first data pull, so subsequent clicks of the update button doesn't
refresh the data. Was goingto look into that tonight.
--
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub:
#41 (comment)
from octoprint-bedlevelvisualizer.
jneilliii
commented on June 15, 2024
Try this...if you have multiple commands in your GCODE setting, place the text @BEDLEVELVISUALIZER just above the G29 command...like this.
What is happening is the collector stops when it receives an ok command, and if that flag isn't in the gcode you enter the ok is coming earlier than expected.
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
so far, so good... 5 rows in and hasn't brought up the graph yet... I'll
let you know the final result here in a few
…On Mon, Apr 30, 2018 at 1:33 PM, jneilliii ***@***.***> wrote:
Try this...if you have multiple commands in your GCODE setting, place the
text @BEDLEVELVISUALIZER just above the G29 command...like this.
[image: image]
<https://user-images.githubusercontent.com/5249455/39448659-99127628-4c93-11e8-8467-8abcf885b691.png>
What is happening is the collector stops when it receives an ok command,
and if that flag isn't in the gcode you enter the ok is coming earlier than
expected.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#41 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aj_7UCIEHhrSaW532x6I94vv5HKMQxh1ks5tt3T9gaJpZM4TkNYA>
.
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
Working perfectly!
…On Mon, Apr 30, 2018 at 1:33 PM, jneilliii ***@***.***> wrote:
Try this...if you have multiple commands in your GCODE setting, place the
text @BEDLEVELVISUALIZER just above the G29 command...like this.
[image: image]
<https://user-images.githubusercontent.com/5249455/39448659-99127628-4c93-11e8-8467-8abcf885b691.png>
What is happening is the collector stops when it receives an ok command,
and if that flag isn't in the gcode you enter the ok is coming earlier than
expected.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#41 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aj_7UCIEHhrSaW532x6I94vv5HKMQxh1ks5tt3T9gaJpZM4TkNYA>
.
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
new issue!!!
every time it runs now, it adds to the stored data with the new data...
doesn't clear the old...
Bed Visualizer Settings
- General <http://10.0.0.195:8188/#bedlevelvisualizer_general>
- Stored Data <http://10.0.0.195:8188/#bedlevelvisualizer_stored_data>
Stored X Positions:
0 24 49 73 98 122 147 171 196 220
Stored Y Positions:
0 6 11 17 23 28 34 39 45 51 56 62 68 73 79 85 90 96 102 107 113 118 124 130 135 141 147 152 158 164 169 175 181 186 192 197 203 209 214 220
Stored Mesh Data:
+0.457 +0.287 +0.347 +0.305 +0.277 +0.257 +0.237 +0.225 +0.217 +0.217
+0.420 +0.345 +0.265 +0.225 +0.197 +0.170 +0.142 +0.127 +0.120 +0.137
+0.345 +0.267 +0.195 +0.165 +0.140 +0.117 +0.102 +0.087 +0.080 +0.072
+0.290 +0.197 +0.112 +0.075 +0.050 +0.022 +0.002 +0.005 +0.005 +0.027
+0.237 +0.160 +0.095 +0.062 +0.027 +0.005 -0.010 -0.008 -0.000 -0.005
+0.217 +0.125 +0.055 -0.000 -0.028 -0.048 -0.065 -0.053 -0.048 -0.025
+0.217 +0.137 +0.067 +0.012 -0.013 -0.020 -0.025 -0.028 -0.023 -0.030
+0.220 +0.127 +0.040 -0.015 -0.038 -0.055 -0.065 -0.053 -0.048 -0.038
+0.225 +0.157 +0.085 +0.040 +0.007 -0.010 -0.010 -0.010 -0.015 -0.035
+0.232 +0.152 +0.095 +0.012 -0.020 -0.005 -0.020 -0.030 -0.040 -0.028
+0.385 +0.202 +0.297 +0.267 +0.247 +0.227 +0.215 +0.205 +0.205 +0.215
+0.355 +0.285 +0.215 +0.180 +0.160 +0.140 +0.120 +0.102 +0.110 +0.130
+0.292 +0.227 +0.162 +0.137 +0.117 +0.102 +0.095 +0.082 +0.080 +0.072
+0.240 +0.165 +0.085 +0.055 +0.037 +0.015 +0.002 +0.012 +0.020 +0.045
+0.212 +0.145 +0.082 +0.060 +0.035 +0.017 +0.007 +0.015 +0.025 +0.020
+0.195 +0.117 +0.050 +0.002 -0.020 -0.035 -0.043 -0.038 -0.015 +0.010
+0.210 +0.135 +0.070 +0.020 +0.012 -0.005 -0.008 +0.010 +0.015 +0.007
+0.217 +0.132 +0.050 -0.000 -0.018 -0.028 -0.028 -0.015 -0.005 +0.017
+0.227 +0.175 +0.107 +0.065 +0.040 +0.030 +0.030 +0.040 +0.042 +0.020
+0.245 +0.177 +0.122 +0.047 +0.017 +0.040 +0.030 +0.015 +0.025 +0.037
+0.487 +0.282 +0.382 +0.327 +0.300 +0.267 +0.235 +0.217 +0.200 +0.185
+0.450 +0.370 +0.285 +0.237 +0.205 +0.170 +0.140 +0.112 +0.102 +0.110
+0.372 +0.300 +0.225 +0.190 +0.155 +0.127 +0.095 +0.082 +0.070 +0.045
+0.315 +0.230 +0.140 +0.092 +0.065 +0.030 +0.002 -0.010 -0.008 +0.002
+0.270 +0.200 +0.122 +0.085 +0.047 +0.017 -0.010 -0.010 -0.010 -0.028
+0.245 +0.157 +0.080 +0.020 -0.015 -0.043 -0.068 -0.068 -0.060 -0.048
+0.245 +0.162 +0.087 +0.030 -0.000 -0.020 -0.035 -0.038 -0.043 -0.063
+0.242 +0.152 +0.062 -0.003 -0.033 -0.055 -0.068 -0.065 -0.070 -0.065
+0.247 +0.180 +0.102 +0.052 +0.015 -0.010 -0.018 -0.025 -0.038 -0.075
+0.250 +0.172 +0.107 +0.022 -0.015 -0.005 -0.030 -0.053 -0.063 -0.060
+0.235 +0.145 +0.197 +0.187 +0.190 +0.195 +0.202 +0.210 +0.235 +0.262
+0.222 +0.177 +0.133 +0.120 +0.125 +0.130 +0.133 +0.137 +0.163 +0.208
+0.167 +0.133 +0.093 +0.095 +0.097 +0.105 +0.110 +0.130 +0.147 +0.165
+0.130 +0.080 +0.030 +0.020 +0.028 +0.033 +0.045 +0.060 +0.100 +0.145
+0.110 +0.075 +0.040 +0.038 +0.038 +0.043 +0.055 +0.082 +0.120 +0.135
+0.110 +0.058 +0.015 -0.013 -0.008 +0.002 +0.020 +0.055 +0.090 +0.137
+0.135 +0.087 +0.055 +0.025 +0.035 +0.053 +0.065 +0.103 +0.135 +0.147
+0.150 +0.097 +0.043 +0.015 +0.023 +0.038 +0.060 +0.100 +0.130 +0.163
+0.185 +0.153 +0.113 +0.097 +0.090 +0.100 +0.133 +0.157 +0.182 +0.185
+0.215 +0.167 +0.137 +0.090 +0.082 +0.133 +0.140 +0.153 +0.180 +0.212
About OctoPrint
…On Mon, Apr 30, 2018 at 1:33 PM, jneilliii ***@***.***> wrote:
Try this...if you have multiple commands in your GCODE setting, place the
text @BEDLEVELVISUALIZER just above the G29 command...like this.
[image: image]
<https://user-images.githubusercontent.com/5249455/39448659-99127628-4c93-11e8-8467-8abcf885b691.png>
What is happening is the collector stops when it receives an ok command,
and if that flag isn't in the gcode you enter the ok is coming earlier than
expected.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#41 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/Aj_7UCIEHhrSaW532x6I94vv5HKMQxh1ks5tt3T9gaJpZM4TkNYA>
.
from octoprint-bedlevelvisualizer.
jneilliii
commented on June 15, 2024
Thanks. I probably forgot to clear the previous value and it's just appending. I'm looking into some other little glitches now and will push an update shortly to the 0.1.0 branch.
from octoprint-bedlevelvisualizer.
5ft24dave
commented on June 15, 2024
Cool
Sent from BlueMail
…On Apr 30, 2018, 15:51, at 15:51, jneilliii ***@***.***> wrote:
Thanks. I probably forgot to clear the previous value and it's just
appending. I'm looking into some other little glitches now and will
push an update shortly to the 0.1.0 branch.
--
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub:
#41 (comment)
from octoprint-bedlevelvisualizer.
jneilliii
commented on June 15, 2024
This issue is fixed now in 0.1.0. Reinstall and ctrl+f5 to reload cache from server and it should work fine now. There is still a weird thing I've run into related to switching tabs, updating, and going into settings and nothing be there. Once I've nailed that down, and hear back from the delta printer guys about the data collection working for them I'll release this version.
from octoprint-bedlevelvisualizer.
Related Issues (20)
- [BUG]: Probe failing only with Bed Level Visualizer plugin enabled HOT 3
- Store Recent Mesh Visuals in Settings HOT 1
- [BUG]: HOT 2
- [FR]: Better PSU Control support HOT 3
- [BUG]: Probing Failed
- [FR]: HOT 5
- [BUG]: OctoDash web page needs authentication HOT 10
- [BUG]: Mesh statistics not readable since rc7 update HOT 11
- [FR]: change the font color in the gui, red and blue are hard on the eyes HOT 1
- [BUG]: No Visualization for Lerdge Z HOT 1
- [FR]: Different colours for data labels HOT 1
- How do I edit coordinate increments in the data and corrections report tabs. HOT 7
- [BUG]: Displayed grid window is too small HOT 2
- [BUG]: Rendering Mesh display error HOT 3
- [BUG]:
- [FR]: Update mesh display through start GCODE HOT 1
- [BUG]: Prusa Mini cannot display any visualization after probing across the bed. HOT 9
- [FR]: Parse/Display Z-offset from ABL process. HOT 3
- [BUG]: HOT 4
- [FR]: Selectable bed temperature without having to rewrite the gcode strings HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from octoprint-bedlevelvisualizer.