the slim version doesn't fit on plate 223x223 about openbot HOT 9 CLOSED

Did you rotate it by 45 degrees? It seems other were able to print it successfully.
See PR#2

from openbot.

Yes I have rotated it

the bottom filled perfectely but not the top

I see your PR, I don't know what is the difference, but the model doesn't fit on cura

from openbot.

In the bottom left, the dimensions show as 223x223. Is there maybe some setting in Cura?

from openbot.

Any luck?

from openbot.

Hello sorry for my late answer,

what do you mean by some settings ???? those dimensions are the piece one on the build plate

from openbot.

Well, you have an ultimaker 2 which as a build plate of 223x223. The model is also 223x223, so it should fit. So you probably have some setting enabled which prevents you from using the complete build area.

• Have you selected build plate adhesion with a brim or a skirt?
  This will increase the overall size of your print.
  To disable it, set Build Plate Adhesion Type to "None".

Other settings that are probably not necessary, but may help to fit the model:

• Disable the second extruder
• Disable prime blob (under build plate adhesion)

from openbot.

Hello,
the build plate adhesion is already set to off and I don't have a second extruder,

i tried to change the g-code flavor but I don't see any change. i don't which setup has been made by @katnoria in PR#2

from openbot.

@ronki2304 Please try https://github.com/intel-isl/OpenBot/blob/develop/body/slim_body/slim_body_top.stl from the development branch. If this does not work, checkout the glueable model.

from openbot.

OK it works thank you very much

from openbot.