OV2640 probe failed with error about esp32-cam-demo HOT 11 CLOSED

from esp32-cam-demo.

0x20003 is Camera not supported.
Two causes can lead to this error:
1.) Camera-Model not activated in config.
2.) Not the correct answer over SCCB from the camera.

I guess number 1. ;)

from esp32-cam-demo.

Might be related to #37. See if toggling power to the camera helps.

from esp32-cam-demo.

from esp32-cam-demo.

When I recompile upload, the error was upgraded. My XCLK pin is 21. I do not understand why something goes wrong. I just started getting in touch with ESP32 last month, but I want to figure it out. This looks cool. thank you all.

from esp32-cam-demo.

@Oitzu hi,Oitzu.Camera model is not activated in configuration. Where to modify the configuration. Is it here, my module is ov2640

from esp32-cam-demo.

from esp32-cam-demo.

Given the log posted in #61, i think this issue is solved.

from esp32-cam-demo.

Yes, thank you for your help.Adherence is victory.

from esp32-cam-demo.

It looks like this issue is closed but doesnt seem to work for me. I get the following output:

Pin configuration is as follows:

To flash the firmware, I connected GPIO0 to GND.

from esp32-cam-demo.

Unrelated to this problem.
Maybe follow #106.

from esp32-cam-demo.