No Connection to 3cx pbx possible about ictfax HOT 8 OPEN

Yes, you need to set up the trunk so your faxes can be delivered.

Currently, there is no interface in the GUI to assign an extension to the user.

On demo.ictfax.org ICTFax SP Edition is installed which has more features than the Open Source version.

from ictfax.

@mr2017x the easiest way is to register ICTFax as Extension in 3CX.
But as ICTFax Freeswitch is not configured well you need to remember about important thing on 3CX side. Extension Number and Authentication ID needs to be the same. This will deal with outgoing faxes.

Reciving is more complicated because ICTFax uses separate trunks to send and recieve faxes.

from ictfax.

thank you both!

Yes, you need to set up the trunk so your faxes can be delivered.

Currently, there is no interface in the GUI to assign an extension to the user.

On demo.ictfax.org ICTFax SP Edition is installed which has more features than the Open Source version.

ok ,set up, put in ext id = auth id + password, nothing happens, no registration issued as i can see on pbx' side.

is there a cli command i didn't see for that?

ok, so another code basis, where is the open source approach? and furthermore, is there a "hidden" installation source which is running smooth?

@mr2017x the easiest way is to register ICTFax as Extension in 3CX.
But as ICTFax Freeswitch is not configured well you need to remember about important thing on 3CX side. Extension Number and Authentication ID needs to be the same. This will deal with outgoing faxes.

Reciving is more complicated because ICTFax uses separate trunks to send and recieve faxes.

i guess so, i am in that business with pbx since several years didn't hazzle with it, also ext id, auth id (if differ) and so on is no problem, but here it seems - it's also no problem - as it doesn't issue a registration from ictfax towards pbx, but it also doesn't seem to log anything so far...?

Did i miss some log or is this version just buggy (in reference to freeswitch error i had to fix and so on?)

furthermore let me ask, is ictfax still being developed?

from ictfax.

@plochu @mr2017x any updates?
I created in 3CX a new fax extension. Then I add a new SIP Trunk in ICTFax. The username and password is the same as in 3CX. As host I took the 3CX IP and as port I tried 5060. The other fields are empty. Now if I try to send a fax, it stuck at "processing". How you guys resolved this?

from ictfax.

Please share the Freeswitch log

from ictfax.

out.log

from ictfax.

Send the log while the fax is being sent.

from ictfax.

@fizaict Where can I find this logs or how can I enable it? I only see the log in /var/log/freeswitch/freeswitch.log and if I send a fax, no information will show.
In /usr/ictcore/log/ictcore.log I see

[2021-09-21 12:33:51] [2314] [WARNING] Session write failed
[2021-09-21 12:33:58] [10739] [WARNING] Session write failed
[2021-09-21 12:33:58] [1628] [WARNING] Session write failed
[2021-09-21 12:33:58] [10739] [WARNING] Session write failed
[2021-09-21 12:33:58] [10739] [FLOW] =================> transmission execution <=================
[2021-09-21 12:33:58] [10739] [FLOW] Executing transmission with id : 6
[2021-09-21 12:33:58] [10739] [FLOW] Attempting with spool_id : 6
[2021-09-21 12:33:58] [10739] [FLOW] Executing program : sendfax(6)
[2021-09-21 12:33:58] [10739] [FLOW] Executing application : originate(16)
[2021-09-21 12:33:58] [1904] [WARNING] Session write failed
[2021-09-21 12:33:58] [4556] [WARNING] Session write failed
[2021-09-21 12:33:58] [12170] [WARNING] Session write failed
[2021-09-21 12:33:58] [1628] [WARNING] Session write failed
[2021-09-21 12:33:58] [4619] [WARNING] Session write failed
[2021-09-21 12:33:58] [2314] [WARNING] Session write failed
[2021-09-21 12:33:58] [1904] [WARNING] Session write failed

from ictfax.