Addition of gate out when the arp or sequencer plays a new note about xiio HOT 7 CLOSED

It is certainly possible. How do you suppose to control the gate lengths?

from xiio.

Depends if its assignable, if not then default to 75% should be fine. If it is, whenever the arp/seq is on, if both ARP and Direction are touched then have it cycle 90%, 75%, 50%, and 25% gate length

from xiio.

That would mean you'd loose two note plates while in arp/sequencer mode, certainly not a good idea. Let's go with fixed length for now.
What module you're connecting it to? In most cases trigger out should be plenty enough.

from xiio.

That should be fine. I'm using a Mutable Peaks

from xiio.

@GimbalSauce can you give that version a go?

from xiio.

Thanks for the work, i added some notes on the Pull of a small bug. Everything else is working as intended, thank you!

from xiio.

Thank you! The gate length setting is now stored with the presets, and also the encoder direction is now properly saved.

from xiio.