CTRL-EVENT-BEACON-LOSS about operating-system HOT 4 CLOSED

What WiFi card does it use? Can you share the output from lspci and lsusb?

from operating-system.

it does not have a built in card, but I installed a generic (chinese) usb wifi dongle and it does the job

I run the client in headless mode, I don't have access to the host's command line, so I can type these inside HA's terminal only

lspci is not recognized

lsusb outputs only device IDs

Bus 005 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0002
Bus 002 Device 002: ID 2550:8761
Bus 001 Device 001: ID 1d6b:0002
Bus 005 Device 002: ID 1415:2000
Bus 006 Device 001: ID 1d6b:0003
Bus 004 Device 001: ID 1d6b:0001
Bus 002 Device 001: ID 1d6b:0001
Bus 005 Device 003: ID 148f:7601

from operating-system.

from settings menu > hardware, I could figure out this:

BUSNUM: '005'
DEVNAME: /dev/bus/usb/005/003
DEVNUM: '003'
DEVPATH: /devices/pci0000:00/0000:00:10.0/usb5/5-2
DEVTYPE: usb_device
DRIVER: usb
ID_BUS: usb
ID_FOR_SEAT: usb-pci-0000_00_10_0-usb-0_2
ID_MODEL: 802.11_n_WLAN
ID_MODEL_ENC: 802.11\x20n\x20WLAN
ID_MODEL_ID: '7601'
ID_PATH: pci-0000:00:10.0-usb-0:2
ID_PATH_TAG: pci-0000_00_10_0-usb-0_2
ID_PATH_WITH_USB_REVISION: pci-0000:00:10.0-usbv2-0:2
ID_REVISION: '0000'
ID_SERIAL: MediaTek_802.11_n_WLAN_1.0
ID_SERIAL_SHORT: '1.0'
ID_USB_INTERFACES: ':ffffff:'
ID_USB_MODEL: 802.11_n_WLAN
ID_USB_MODEL_ENC: 802.11\x20n\x20WLAN
ID_USB_MODEL_ID: '7601'
ID_USB_REVISION: '0000'
ID_USB_SERIAL: MediaTek_802.11_n_WLAN_1.0
ID_USB_SERIAL_SHORT: '1.0'
ID_USB_VENDOR: MediaTek
ID_USB_VENDOR_ENC: MediaTek
ID_USB_VENDOR_ID: 148f
ID_VENDOR: MediaTek
ID_VENDOR_ENC: MediaTek
ID_VENDOR_ID: 148f
MAJOR: '189'
MINOR: '514'
PRODUCT: 148f/7601/0
SUBSYSTEM: usb
TAGS: ':seat:'
TYPE: 0/0/0
USEC_INITIALIZED: '2448813'

from operating-system.

There hasn't been any activity on this issue recently. To keep our backlog manageable we have to clean old issues, as many of them have already been resolved with the latest updates.
Please make sure to update to the latest Home Assistant OS version and check if that solves the issue. Let us know if that works for you by adding a comment 👍
This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.

from operating-system.