Run on rpi 3 B+ about operating-system HOT 6 CLOSED

After some further testing I can add the following details. The 64 bit build just does nothing (black screen). The 32 bit build starts with scanning for ethernet. He doesn't find anything, then checks the four USB ports. Then quite quickly I see an endless loop of "fsm 1, hsts 00000001". It is like this other issue describes: https://www.mail-archive.com/[email protected]/msg01380.html.

I've tried to flash both versions twice but I can't get it to work. I also tried two ethernet cables, but none work.

EDIT: just to make sure that my SD card wasn't corrupt I've flashed Raspbian once more and that one works perfectly. Suddenly I can also see the device on the network.

from operating-system.

@danielsjf I experienced the same with both pi3 builds.

from operating-system.

Fix with last dev

from operating-system.

I reopen this while the problem is with saveenv command. I workarroundit now, for development version is that okay.

I ask on mailing list, if some on know the problem.

from operating-system.

There is a patch to fix this: http://git.denx.de/?p=u-boot.git;a=blobdiff;f=drivers/mmc/bcm2835_sdhost.c;h=1ce019af579fb5b1e06bb04ac816733678bb51cf;hp=96428333b0abb2d28f3d845998fa2d44a70ce9ef;hb=79fd08f7456c7d12b04ef39e51d84d9981599c3a;hpb=d295c3ec3543e697b6f9f077f52877e081db4c6f

from operating-system.

I just ran into this exact issue this week. I think I was running hassos 2.0 or 2.1 on 0.88.2. It just wouldn't boot and I was getting this issue. I was also using the evo high endurance drive on a pi 3b+.. I can see all the partitions and everything is valid..

from operating-system.