Comments (10)
awesomeruss
commented on August 27, 2024
1
Same issue here with my 3 tapo 110 smart switches
`Logger: homeassistant.config_entries
Source: config_entries.py:586
First occurred: 06:47:31 (3 occurrences)
Last logged: 06:47:31
Error setting up entry Living room camera Smart Plug P110 for tplink
Error setting up entry Snapmaker Smart Plug P110 for tplink
Error setting up entry Bedroom Camera Smart Plug P110 for tplink
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/config_entries.py", line 586, in async_setup
result = await component.async_setup_entry(hass, self)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/tplink/init.py", line 165, in async_setup_entry
device: Device = await Device.connect(config=config)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/device.py", line 233, in connect
return await connect(host=host, config=config) # type: ignore[arg-type]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/device_factory.py", line 71, in connect
return await _connect(config, protocol)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/device_factory.py", line 110, in _connect
await device.update()
File "/usr/local/lib/python3.12/site-packages/kasa/smart/smartdevice.py", line 156, in update
await self._negotiate()
File "/usr/local/lib/python3.12/site-packages/kasa/smart/smartdevice.py", line 132, in _negotiate
resp = await self.protocol.query(initial_query)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 68, in query
return await self._query(request, retry_count)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 73, in _query
return await self._execute_query(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 202, in _execute_query
return await self._execute_multiple_query(request, retry_count)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 145, in _execute_multiple_query
response_step = await self._transport.send(smart_request)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/klaptransport.py", line 356, in send
decrypted_response = self._encryption_session.decrypt(response_data)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/klaptransport.py", line 491, in decrypt
dp = decryptor.update(msg[32:]) + decryptor.finalize()
^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/cryptography/hazmat/primitives/ciphers/base.py", line 184, in finalize
data = self._ctx.finalize()
^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/cryptography/hazmat/backends/openssl/ciphers.py", line 223, in finalize
raise ValueError(
ValueError: The length of the provided data is not a multiple of the block length.`
from core.
home-assistant
commented on August 27, 2024
Hey there @rytilahti, @bdraco, @sdb9696, mind taking a look at this issue as it has been labeled with an integration (tplink) you are listed as a code owner for? Thanks!
Code owner commands
Code owners of tplink can trigger bot actions by commenting:
@home-assistant closeCloses the issue.@home-assistant rename Awesome new titleRenames the issue.@home-assistant reopenReopen the issue.@home-assistant unassign tplinkRemoves the current integration label and assignees on the issue, add the integration domain after the command.@home-assistant add-label needs-more-informationAdd a label (needs-more-information, problem in dependency, problem in custom component) to the issue.@home-assistant remove-label needs-more-informationRemove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.
(message by CodeOwnersMention)
tplink documentation
tplink source
(message by IssueLinks)
from core.
drchanas
commented on August 27, 2024
from core.
jastBytes
commented on August 27, 2024
I have update to 2024.7.3 and both of my TP P110 can't be connected anymore.
These are the logs when trying to set up the integration:
Logger: aiohttp.server
Quelle: /usr/local/lib/python3.12/site-packages/aiohttp/web_protocol.py:421
Erstmals aufgetreten: 21. Juli 2024 um 15:05:51 (6 Vorkommnisse)
Zuletzt protokolliert: 10:10:38
Error handling request
Traceback (most recent call last):
File "/usr/local/lib/python3.12/site-packages/aiohttp/web_protocol.py", line 452, in _handle_request
resp = await request_handler(request)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/aiohttp/web_app.py", line 543, in _handle
resp = await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/aiohttp/web_middlewares.py", line 114, in impl
return await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/security_filter.py", line 92, in security_filter_middleware
return await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/forwarded.py", line 210, in forwarded_middleware
return await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/request_context.py", line 26, in request_context_middleware
return await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/auth.py", line 242, in auth_middleware
return await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/headers.py", line 32, in headers_middleware
response = await handler(request)
^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/helpers/http.py", line 73, in handle
result = await handler(request, **request.match_info)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/decorators.py", line 81, in with_admin
return await func(self, request, *args, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/config/config_entries.py", line 222, in post
return await super().post(request, flow_id)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/http/data_validator.py", line 74, in wrapper
return await method(view, request, data, *args, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/helpers/data_entry_flow.py", line 122, in post
result = await self._flow_mgr.async_configure(flow_id, data)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 368, in async_configure
result = await self._async_configure(flow_id, user_input)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 415, in _async_configure
result = await self._async_handle_step(
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 518, in _async_handle_step
result: _FlowResultT = await getattr(flow, method)(user_input)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/tplink/config_flow.py", line 198, in async_step_discovery_auth_confirm
device = await self._async_try_connect(
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/tplink/config_flow.py", line 443, in _async_try_connect
self._discovered_device = await Device.connect(config=config)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/device.py", line 233, in connect
return await connect(host=host, config=config) # type: ignore[arg-type]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/device_factory.py", line 71, in connect
return await _connect(config, protocol)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/device_factory.py", line 110, in _connect
await device.update()
File "/usr/local/lib/python3.12/site-packages/kasa/smart/smartdevice.py", line 166, in update
await self._negotiate()
File "/usr/local/lib/python3.12/site-packages/kasa/smart/smartdevice.py", line 138, in _negotiate
resp = await self.protocol.query(initial_query)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 90, in query
return await self._query(request, retry_count)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 95, in _query
return await self._execute_query(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 250, in _execute_query
return await self._execute_multiple_query(request, retry_count)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/smartprotocol.py", line 190, in _execute_multiple_query
response_step = await self._transport.send(smart_request)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/klaptransport.py", line 355, in send
decrypted_response = self._encryption_session.decrypt(response_data)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/kasa/klaptransport.py", line 486, in decrypt
dp = decryptor.update(msg[32:]) + decryptor.finalize()
^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/cryptography/hazmat/primitives/ciphers/base.py", line 184, in finalize
data = self._ctx.finalize()
^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/cryptography/hazmat/backends/openssl/ciphers.py", line 223, in finalize
raise ValueError(
ValueError: The length of the provided data is not a multiple of the block length.
from core.
jastBytes
commented on August 27, 2024
It works again. Having those P110 unplugged they can be set up again.
from core.
sdb9696
commented on August 27, 2024
You need to power cycle the devices.
from core.
saschaabraham
commented on August 27, 2024
Powercycle does not help. After a while, the plugs are unavailable again.
from core.
sdb9696
commented on August 27, 2024
Powercycle does not help. After a while, the plugs are unavailable again.
What HA version are you on? You need to be on 2024.7.3
from core.
saschaabraham
commented on August 27, 2024
2024.7.3
Today two plugs where unavailable. They all have internet access. I made a powercycle and they are back again, this is the third oder fourth time, i had to powercyle these plugs. I will write here, if they are unavailable again.
from core.
sdb9696
commented on August 27, 2024
I'm closing this issue as the OP issue was resolved in 2024.7.3.
@saschaabraham if you continue to have issues please open a new issue describing it and include diagnostics and logs etc.
from core.
Related Issues (20)
- [Unifi] If url returns 403 the extension can't be reconfigured. HOT 2
- Cant connect to matter devices working in Alexa , Apple home and Google home wifi and Thread HOT 3
- VeSync supported devices HOT 1
- Flo by Moen integration doesn't report water usage in a way the energy dashboard can consume HOT 3
- Gree Pular Pro - device is unavailable HOT 1
- OTP Authentication not possible HOT 2
- DSMR Slimme Meter integration relies on non-Open Source Python module HOT 6
- 3 columns in Sections show different as 3 columns in ordinary dashboard HOT 1
- [notify.all_devices] doesn't work if one of mobile devices was renamed HOT 1
- "Uncalibrated" state not handled HOT 3
- setting z-wave switch to 'always_on' does not hide the toggle HOT 5
- Stuck Loading Data after update HOT 3
- modbus integration loops indefinitely over frame HOT 2
- Multiple SimpliSafe instances and disconnects HOT 2
- modbus integration is blocked by a non-responsive sensor HOT 5
- Zigbee devices which loose power are not recognized anymore as soon they have power again HOT 5
- according to log update error in blebox integration HOT 1
- Wyoming satellite conversation history HOT 1
- opower pg&e will not authorize HOT 3
- Problems with tuya cam stream, not working... HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from core.