ValueError: Config entry has already been setup! about core HOT 6 CLOSED

Which integrations provides these?

Error setting up entry Master Bedroom Android TV for media_player
Error setting up entry Master Bedroom Android TV for remote

../Frenck

from core.

It's using that Android TV integration

from core.

Hey there @JeffLIrion, @ollo69, mind taking a look at this issue as it has been labeled with an integration (androidtv) you are listed as a code owner for? Thanks!

_{^{(message by CodeOwnersMention)}}

androidtv documentation
androidtv source
_{^{(message by IssueLinks)}}

from core.

so the error is because of two things. same mac and or same ip as another android debug bridge config entry.

if i had FireTV A and it had ip 192.168.0.101 and then put FireTV B with that same ip with out removing the integration, i will get the error. different macs but same ip, easy example is switching from ethernet to wifi.

if i had an otg adapter, and it had mac 00:ab:cd:ef:00 if i where to but FireTV A on the otg adapter but with ip 192.168.0.101 not remove the config entry and then swap it out with FireTV B using the same otg adapter but with ip 192.168.0.102 when i try to add a new config entry for Fire TV while Keeping the config entry for FireTV A i will get the error.

the android debuging bridge logs and identifies the config entry by mac address. so if the ip is already configured but the mac address doesn't match error occurs. in order for you to add another device the mac and ip have to be unique

solution is easy remove any existing config entry with the same mac or ip

from core.

so the error is because of two things. same mac and or same ip as another android debug bridge config entry.

if i had FireTV A and it had ip 192.168.0.101 and then put FireTV B with that same ip with out removing the integration, i will get the error. different macs but same ip, easy example is switching from ethernet to wifi.

if i had an otg adapter, and it had mac 00:ab:cd:ef:00 if i where to but FireTV A on the otg adapter but with ip 192.168.0.101 not remove the config entry and then swap it out with FireTV B using the same otg adapter but with ip 192.168.0.102 when i try to add a new config entry for Fire TV while Keeping the config entry for FireTV A i will get the error.

the android debuging bridge logs and identifies the config entry by mac address. so if the ip is already configured but the mac address doesn't match error occurs. in order for you to add another device the mac and ip have to be unique

solution is easy remove any existing config entry with the same mac or ip

i wish i understood this

from core.

I've added a couple of new issues to core which reference this. I'm seeing the same with Switchbot (BT-based devices), LaMetric and Dyson. Hope that helps in your troubleshooting.

from core.