PTZ Test failed on D-Link DCS 5222L B about node-onvif HOT 6 OPEN

I updated the node-onvif today. Try the latest version of the node-onvif.

from node-onvif.

Thanks for the update.
Test on PTZ Test on D-Link DCS 5222L B
still fails.

from node-onvif.

I'm having the same issue with the same camera.

from node-onvif.

I found a D-Link DCS 5222L on Amazon Japan (where I live). I ordered it today. When it arrives, I'll try the module with it. Give me some time.

from node-onvif.

A D-Link DCS 5222L I ordered arrived yesterday. It took long time since I ordered. The product was shipped from overseas. Anyway, I tried it.

I found that the PTZ-related SOAP data from D-Link DCS 5222L looks like a little bit weird. Besides, any PTZ-related SOAP commands are not accepted by the D-Link DCS 5222L. To be precise, it responds no error but does nothing.

I also try to control the PTZ using the ONVIF Device Manager. Even the ONVIF Device Manager can not control the PTZ of the device.

I wonder if the D-Link DCS 5222L is not compliant with the ONVIF specification regarding the PTZ. Anyway, it will probably take long time to solve this issue.

from node-onvif.

No news since?
I've found this document
http://www.trendnet.com/_uploads/helpdesk/tv-ip612xx_cgi-10.pdf
and tried that pan and tilt answer requests... but, at least in my camera, the minimum value for pan can be set as 0, but is get to 54.
I hope it can help.

from node-onvif.