Cisco stack reporting issue about glpi HOT 11 OPEN

Plese provide XML/JSON inventory file we can use to reproduce.

from glpi.

@hello bacus99

i have bug similary Stack 2 or 3 or 4 or 5

Try this command :

1. glpi-netdiscovery.bat --host YourIP --credentials version:3,username:yourname,authprotocol:SHA,authpassword:XXXXXX,privprotocol:AES128,privpassword:XXXXXXX -i -s c:\folder
   

2. delete the stack and purge, its very important

3. Import only in the c:\folder\netinventory\yourip.xml

4. import
   

5. Normally it's ok

6. perform an update, you lose the information
   I lose the information on all my stacks

I have this bug for 10.0.3

example :

before

if i udpate ( after): ko

from glpi.

OK, I tried your way.

Seems importing says OK, but only 1 port discovered

when I export my xml from GLPI, i can see all the config and ports... Something is blocking. Logs are empty

Waiting for security to approve cleaned xml

from glpi.

networkequipment_4_4977 1.txt
Here's the XML

from glpi.

I cannot see your original issue with provided XML. With this one, there is only one network equipment imported; with one port in it.

Plus on random frequency, glpi-netinventory snmp update flush all my ports (And sometime change the name of the switch 0 (ex: Site-SW-01 to Site-SW-01 - 2)

This looks like a rule issue.

@steph461 please provide inventory file to reproduce.

from glpi.

So you are right, it's not the common point. I reset the rules, still add/remove the ports and don't see 2 switches. Just found in my file that we DON'T see the second serial number switch like I can see in Orion

I'll do more tests, but it makes sense it will not create the second switch... Now why

from glpi.

@steph461 not 100% sure if related, but I have 2 sites OK

My faulty switches: Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 16.9.4
My good switches: Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 17.6.5

What is the version of your switches?

from glpi.

@steph461 not 100% sure if related, but I have 2 sites OK

My faulty switches: Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 16.9.4 My good switches: Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 17.6.5

What is the version of your switches?

Aruba 2930F VSF VC, revision WC.16.10.0009,

other example :
i have stack*5 If i update my stack, its ko . I must to delete stack *5 and I create the good XML folder netinventory

from glpi.

When you have test, you took the files in the folder in this folder ?

from glpi.

My faulty switches: Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 16.9.4 My good switches: Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 17.6.5

That looks like an issue on switch support on agent side. Please open a discussion on agent repository.

from glpi.

OK based on my tests, agent 1.9 installed on Linux

glpi-netdiscovery --first 172.16.10.1 --last 172.16.10.254 --credentials version:2c,community:community1 --credentials version:2c,community:community2 --credentials version:2c,community:public --credentials 'version:3,username:snmp-glpi,authprotocol:SHA,authpassword:aaaa,privprotocol:AES,privpassword:ssss' --debug --control --backend-collect-timeout 30 --timeout 5 --retries 1 --threads 10000 -i -s /tmp

glpi-injector --no-ssl-check -v --recursive --directory /tmp/netinventory -u https://glpi.mycompany/glpi/marketplace/glpiinventory/

Import all switches with stacks

From GLPI inventory interface, stack are single switch and delete ports after few passes

from glpi.