Code Monkey home page Code Monkey logo

Comments (5)

fabioestevam avatar fabioestevam commented on July 18, 2024

Also: if I manually build kernel lf-6.6.3-1.0.0 from NXP and flash it to the SD card, the kernel boots, the SD card is detected and the rootfs is successfully mounted.

It seems there is a kernel regression when going from 6.6.3 to 6.6.28.

from meta-freescale.

MrCry0 avatar MrCry0 commented on July 18, 2024

@fabioestevam Could you please add the boot log from NXP kernel?

from meta-freescale.

fabioestevam avatar fabioestevam commented on July 18, 2024

Hi @MrCry0

Here it goes:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.6.3-gccf0a99701a7 (fabio@fabio-Precision-3551) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #11 SMP PREEMPT Tue May 14 17:50:59 -03 2024
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: NXP i.MX93 11X11 EVK board
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b0000000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000000b0000000..0x00000000bfffffff (262144 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x000000002021e000..0x000000002021efff (4 KiB) nomap non-reusable rsc-table@2021e000
[    0.000000] OF: reserved mem: 0x0000000096000000..0x0000000097dfffff (30720 KiB) nomap non-reusable optee_core@96000000
[    0.000000] OF: reserved mem: 0x0000000097e00000..0x0000000097ffffff (2048 KiB) nomap non-reusable optee_shm@97e00000
[    0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a4007fff (32 KiB) nomap non-reusable vdev0vring0@a4000000
[    0.000000] OF: reserved mem: 0x00000000a4008000..0x00000000a400ffff (32 KiB) nomap non-reusable vdev0vring1@a4008000
[    0.000000] OF: reserved mem: 0x00000000a4010000..0x00000000a4017fff (32 KiB) nomap non-reusable vdev1vring0@a4010000
[    0.000000] OF: reserved mem: 0x00000000a4018000..0x00000000a401ffff (32 KiB) nomap non-reusable vdev1vring1@a4018000
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a4020000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node vdevbuffer@a4020000, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000000a4020000..0x00000000a411ffff (1024 KiB) nomap non-reusable vdevbuffer@a4020000
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a4120000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node ele-reserved@a4120000, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000000a4120000..0x00000000a421ffff (1024 KiB) nomap non-reusable ele-reserved@a4120000
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000c0000000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node ethosu_region@C0000000, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000000c0000000..0x00000000cfffffff (262144 KiB) map reusable ethosu_region@C0000000
[    0.000000] earlycon: lpuart32 at MMIO32 0x0000000044380000 (options '')
[    0.000000] printk: bootconsole [lpuart32] enabled
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xffbc66c0-0xffbc8fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000095ffffff]
[    0.000000]   node   0: [mem 0x0000000098000000-0x00000000a3ffffff]
[    0.000000]   node   0: [mem 0x00000000a4000000-0x00000000a421ffff]
[    0.000000]   node   0: [mem 0x00000000a4220000-0x00000000ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000] On node 0, zone DMA: 8192 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 22 pages/cpu s50536 r8192 d31384 u90112
[    0.000000] pcpu-alloc: s50536 r8192 d31384 u90112 alloc=22*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: console=ttyLP0,115200 earlycon root=/dev/mmcblk1p2 rootwait rw
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507904
[    0.000000] Policy zone: DMA
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 2.
[    0.000000] software IO TLB: mapped [mem 0x00000000f9800000-0x00000000fd800000] (64MB)
[    0.000000] Memory: 1396520K/2064384K available (20672K kernel code, 1612K rwdata, 7628K rodata, 3904K init, 634K bss, 143576K reserved, 524288K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 960 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000048040000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008356] Console: colour dummy device 80x25
[    0.012589] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.022763] pid_max: default: 32768 minimum: 301
[    0.027400] LSM: initializing lsm=capability,integrity
[    0.032539] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.039839] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.048277] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.054649] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.061497] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.069117] rcu: Hierarchical SRCU implementation.
[    0.073743] rcu: 	Max phase no-delay instances is 1000.
[    0.079807] EFI services will not be available.
[    0.084305] smp: Bringing up secondary CPUs ...
[    0.088965] Detected VIPT I-cache on CPU1
[    0.089024] GICv3: CPU1: found redistributor 100 region 0:0x0000000048060000
[    0.089060] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.089158] smp: Brought up 1 node, 2 CPUs
[    0.110512] SMP: Total of 2 processors activated.
[    0.115184] CPU features: detected: 32-bit EL0 Support
[    0.120307] CPU features: detected: 32-bit EL1 Support
[    0.125413] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.133995] CPU features: detected: Common not Private translations
[    0.140229] CPU features: detected: CRC32 instructions
[    0.145351] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.151062] CPU features: detected: LSE atomic instructions
[    0.156608] CPU features: detected: Privileged Access Never
[    0.162154] CPU features: detected: RAS Extension Support
[    0.167530] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.174511] CPU: All CPU(s) started at EL2
[    0.178535] alternatives: applying system-wide alternatives
[    0.188269] devtmpfs: initialized
[    0.196859] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.206358] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.219892] pinctrl core: initialized pinctrl subsystem
[    0.226401] DMI not present or invalid.
[    0.230418] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.236712] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.243588] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.251290] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.259154] audit: initializing netlink subsys (disabled)
[    0.264628] audit: type=2000 audit(0.176:1): state=initialized audit_enabled=0 res=1
[    0.265006] thermal_sys: Registered thermal governor 'step_wise'
[    0.272195] thermal_sys: Registered thermal governor 'power_allocator'
[    0.278199] cpuidle: using governor menu
[    0.288747] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.295370] ASID allocator initialised with 65536 entries
[    0.301396] Serial: AMBA PL011 UART driver
[    0.305285] imx mu driver is registered.
[    0.309130] imx rpmsg driver is registered.
[    0.318950] imx93-pinctrl 443c0000.pinctrl: initialized IMX pinctrl driver
[    0.332411] platform 4ae30000.lcd-controller: Fixed dependency cycle(s) with /soc@0/dsi@4ae10000/ports/port@0/endpoint
[    0.345682] Modules: 24096 pages in range for non-PLT usage
[    0.345694] Modules: 515616 pages in range for PLT usage
[    0.351726] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.363534] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.369773] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.376532] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.382772] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.389531] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.395772] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.402531] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.410404] ACPI: Interpreter disabled.
[    0.414694] iommu: Default domain type: Translated
[    0.419252] iommu: DMA domain TLB invalidation policy: strict mode
[    0.425632] SCSI subsystem initialized
[    0.429239] libata version 3.00 loaded.
[    0.429403] usbcore: registered new interface driver usbfs
[    0.434635] usbcore: registered new interface driver hub
[    0.439925] usbcore: registered new device driver usb
[    0.445758] mc: Linux media interface: v0.10
[    0.449804] videodev: Linux video capture interface: v2.00
[    0.455266] pps_core: LinuxPPS API ver. 1 registered
[    0.460159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.469264] PTP clock support registered
[    0.473294] EDAC MC: Ver: 3.0.0
[    0.476772] scmi_core: SCMI protocol bus registered
[    0.481877] FPGA manager framework
[    0.485066] Advanced Linux Sound Architecture Driver Initialized.
[    0.491618] Bluetooth: Core ver 2.22
[    0.494946] NET: Registered PF_BLUETOOTH protocol family
[    0.500223] Bluetooth: HCI device and connection manager initialized
[    0.506545] Bluetooth: HCI socket layer initialized
[    0.511396] Bluetooth: L2CAP socket layer initialized
[    0.516429] Bluetooth: SCO socket layer initialized
[    0.521620] vgaarb: loaded
[    0.524694] clocksource: Switched to clocksource arch_sys_counter
[    0.530750] VFS: Disk quotas dquot_6.6.0
[    0.534462] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.541402] pnp: PnP ACPI: disabled
[    0.549648] NET: Registered PF_INET protocol family
[    0.554430] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.562738] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.571063] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.578721] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.586662] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.594267] TCP: Hash tables configured (established 16384 bind 16384)
[    0.600651] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.607244] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.614449] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.620276] RPC: Registered named UNIX socket transport module.
[    0.625939] RPC: Registered udp transport module.
[    0.630605] RPC: Registered tcp transport module.
[    0.635285] RPC: Registered tcp-with-tls transport module.
[    0.640745] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.647892] PCI: CLS 0 bytes, default 64
[    0.651774] kvm [1]: IPA Size Limit: 40 bits
[    0.655821] kvm [1]: GICv3: no GICV resource entry
[    0.660567] kvm [1]: disabling GICv2 emulation
[    0.665000] kvm [1]: GIC system register CPU interface enabled
[    0.670813] kvm [1]: vgic interrupt IRQ9
[    0.674712] kvm [1]: VHE mode initialized successfully
[    0.680731] Initialise system trusted keyrings
[    0.685097] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[    0.691566] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.697370] NFS: Registering the id_resolver key type
[    0.702186] Key type id_resolver registered
[    0.706319] Key type id_legacy registered
[    0.710318] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.716988] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.724357] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.730598] 9p: Installing v9fs 9p2000 file system support
[    0.757890] Key type asymmetric registered
[    0.761716] Asymmetric key parser 'x509' registered
[    0.766604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.773944] io scheduler mq-deadline registered
[    0.778451] io scheduler kyber registered
[    0.782455] io scheduler bfq registered
[    0.790680] EINJ: ACPI disabled.
[    0.798214] Bus freq driver module loaded
[    0.807449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.815832] 44380000.serial: ttyLP0 at MMIO 0x44380010 (irq = 17, base_baud = 1500000) is a FSL_LPUART
[    0.825148] printk: console [ttyLP0] enabled
[    0.833562] printk: bootconsole [lpuart32] disabled
[    0.854884] loop: module loaded
[    0.859314] megasas: 07.725.01.00-rc1
[    0.867879] tun: Universal TUN/TAP device driver, 1.6
[    0.873605] thunder_xcv, ver 1.0
[    0.876881] thunder_bgx, ver 1.0
[    0.880117] nicpf, ver 1.0
[    0.883699] pps pps0: new PPS source ptp0
[    0.891000] fec 42890000.ethernet eth0: registered PHC device 0
[    0.898441] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    0.905689] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.911031] hclge is initializing
[    0.914366] e1000: Intel(R) PRO/1000 Network Driver
[    0.919239] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.925002] e1000e: Intel(R) PRO/1000 Network Driver
[    0.929954] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.935879] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.941273] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.946850] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    0.953106] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.959168] sky2: driver version 1.30
[    0.963245] usbcore: registered new device driver r8152-cfgselector
[    0.969533] usbcore: registered new interface driver r8152
[    0.975436] VFIO - User Level meta-driver version: 0.3
[    0.982598] usbcore: registered new interface driver uas
[    0.987940] usbcore: registered new interface driver usb-storage
[    0.994027] usbcore: registered new interface driver usbserial_generic
[    1.000573] usbserial: USB Serial support registered for generic
[    1.006600] usbcore: registered new interface driver ftdi_sio
[    1.012351] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.019660] usbcore: registered new interface driver usb_serial_simple
[    1.026222] usbserial: USB Serial support registered for carelink
[    1.032320] usbserial: USB Serial support registered for flashloader
[    1.038671] usbserial: USB Serial support registered for funsoft
[    1.044682] usbserial: USB Serial support registered for google
[    1.050604] usbserial: USB Serial support registered for hp4x
[    1.056351] usbserial: USB Serial support registered for kaufmann
[    1.062447] usbserial: USB Serial support registered for libtransistor
[    1.068978] usbserial: USB Serial support registered for moto_modem
[    1.075244] usbserial: USB Serial support registered for motorola_tetra
[    1.081856] usbserial: USB Serial support registered for nokia
[    1.087692] usbserial: USB Serial support registered for novatel_gps
[    1.094057] usbserial: USB Serial support registered for siemens_mpi
[    1.100413] usbserial: USB Serial support registered for suunto
[    1.106335] usbserial: USB Serial support registered for vivopay
[    1.112346] usbserial: USB Serial support registered for zio
[    1.118009] usbcore: registered new interface driver usb_ehset_test
[    1.127323] input: 44440000.bbnsm:pwrkey as /devices/platform/soc@0/44000000.bus/44440000.bbnsm/44440000.bbnsm:pwrkey/input/input0
[    1.142499] bbnsm_rtc 44440000.bbnsm:rtc: registered as rtc0
[    1.148814] bbnsm_rtc 44440000.bbnsm:rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
[    1.158063] i2c_dev: i2c /dev entries driver
[    1.164348] qoriq_thermal 44482000.tmu: invalid range data.
[    1.171160] imx7ulp-wdt 42490000.watchdog: imx93 wdt probe
[    1.203925] Bluetooth: HCI UART driver ver 2.3
[    1.208389] Bluetooth: HCI UART protocol H4 registered
[    1.213518] Bluetooth: HCI UART protocol BCSP registered
[    1.218841] Bluetooth: HCI UART protocol LL registered
[    1.223971] Bluetooth: HCI UART protocol ATH3K registered
[    1.229380] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.235766] Bluetooth: HCI UART protocol Broadcom registered
[    1.241432] Bluetooth: HCI UART protocol QCA registered
[    1.247859] sdhci: Secure Digital Host Controller Interface driver
[    1.254073] sdhci: Copyright(c) Pierre Ossman
[    1.258902] Synopsys Designware Multimedia Card Interface Driver
[    1.265303] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.272275] ledtrig-cpu: registered to indicate activity on CPUs
[    1.279280] fsl-se-fw se-fw2: assigned reserved memory node ele-reserved@a4120000
[    1.288654] fsl-se-fw se-fw2: Successfully registered ele-trng
[    1.294289] random: crng init done
[    1.294842] fsl-se-fw se-fw2: i.MX secure-enclave: mu2 interface to firmware, configured.
[    1.306123] mmc0: SDHCI controller on 42850000.mmc [42850000.mmc] using ADMA
[    1.306216] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.319906] usbcore: registered new interface driver usbhid
[    1.325480] usbhid: USB HID core driver
[    1.331163] mxc-isi_v1 4ae40000.isi: mxc_isi.0 registered successfully
[    1.338798] ethosu ethosu: assigned reserved memory node ethosu_region@C0000000
[    1.377658] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    1.384515] mmcblk0: mmc0:0001 DA6016 14.7 GiB
[    1.389247] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    1.390063]  mmcblk0: p1 p2
[    1.399749]  cs_system_cfg: CoreSight Configuration manager initialised
[    1.400751] mmcblk0boot0: mmc0:0001 DA6016 4.00 MiB
[    1.408345] optee: probing for conduit method.
[    1.412664] mmcblk0boot1: mmc0:0001 DA6016 4.00 MiB
[    1.416231] optee: revision 4.0 (e0a3e777)
[    1.421717] optee: dynamic shared memory is enabled
[    1.421955] mmcblk0rpmb: mmc0:0001 DA6016 4.00 MiB, chardev (234:0)
[    1.426106] optee: initialized driver
[    1.444046] NET: Registered PF_LLC protocol family
[    1.448951] u32 classifier
[    1.451679]     input device check on
[    1.455343]     Actions configured
[    1.459164] NET: Registered PF_INET6 protocol family
[    1.464850] Segment Routing with IPv6
[    1.468525] In-situ OAM (IOAM) with IPv6
[    1.472501] NET: Registered PF_PACKET protocol family
[    1.477569] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.490605] Bluetooth: RFCOMM TTY layer initialized
[    1.495487] Bluetooth: RFCOMM socket layer initialized
[    1.500639] Bluetooth: RFCOMM ver 1.11
[    1.504385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.509684] Bluetooth: BNEP filters: protocol multicast
[    1.514904] Bluetooth: BNEP socket layer initialized
[    1.519859] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.525772] Bluetooth: HIDP socket layer initialized
[    1.530918] 8021q: 802.1Q VLAN Support v1.8
[    1.535123] lib80211: common routines for IEEE802.11 drivers
[    1.540773] lib80211_crypt: registered algorithm 'NULL'
[    1.540777] lib80211_crypt: registered algorithm 'WEP'
[    1.540780] lib80211_crypt: registered algorithm 'CCMP'
[    1.540783] lib80211_crypt: registered algorithm 'TKIP'
[    1.540809] 9pnet: Installing 9P2000 support
[    1.545206] Key type dns_resolver registered
[    1.562238] registered taskstats version 1
[    1.566477] Loading compiled-in X.509 certificates
[    1.593359] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
[    1.601688] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
[    1.622803] imx-dwmac 428a0000.ethernet: IRQ eth_lpi not found
[    1.629617] imx-dwmac 428a0000.ethernet: User ID: 0x10, Synopsys ID: 0x52
[    1.636421] imx-dwmac 428a0000.ethernet: 	DWMAC4/5
[    1.641209] imx-dwmac 428a0000.ethernet: DMA HW capability register supported
[    1.648335] imx-dwmac 428a0000.ethernet: RX Checksum Offload Engine supported
[    1.655457] imx-dwmac 428a0000.ethernet: TX Checksum insertion supported
[    1.662147] imx-dwmac 428a0000.ethernet: Wake-Up On Lan supported
[    1.668284] imx-dwmac 428a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.675930] imx-dwmac 428a0000.ethernet: Enabled L3L4 Flow TC (entries=8)
[    1.682707] imx-dwmac 428a0000.ethernet: Enabled RFS Flow TC (entries=10)
[    1.689495] imx-dwmac 428a0000.ethernet: Enabling HW TC (entries=256, max_off=256)
[    1.697051] imx-dwmac 428a0000.ethernet: Using 32/32 bits DMA host/device width
[    1.713252] remoteproc remoteproc0: imx-rproc is available
[    1.726578] i2c 0-003d: Fixed dependency cycle(s) with /soc@0/dsi@4ae10000/ports/port@1/endpoint
[    1.735499] adv7511 0-003d: supply avdd not found, using dummy regulator
[    1.742305] adv7511 0-003d: supply dvdd not found, using dummy regulator
[    1.749035] adv7511 0-003d: supply pvdd not found, using dummy regulator
[    1.755753] adv7511 0-003d: supply a2vdd not found, using dummy regulator
[    1.762558] adv7511 0-003d: supply v3p3 not found, using dummy regulator
[    1.769273] adv7511 0-003d: supply v1p2 not found, using dummy regulator
[    1.776234] adv7511 0-003d: Probe failed. Remote port 'dsi@4ae10000' disabled
[    1.783702] st_lsm6dsx_i2c 0-006a: supply vdd not found, using dummy regulator
[    1.791012] st_lsm6dsx_i2c 0-006a: supply vddio not found, using dummy regulator
[    2.331692] st_lsm6dsx_i2c 0-006a: mounting matrix not found: using identity...
[    2.339762] i2c i2c-0: LPI2C adapter registered
[    2.345934] pca953x 1-0022: supply vcc not found, using dummy regulator
[    2.352672] pca953x 1-0022: using AI
[    2.357862] adp5585-gpio adp5585-gpio.1.auto: DMA mask not set
[    2.364487] adp5585-pwm adp5585-pwm.2.auto: DMA mask not set
[    2.370302] i2c i2c-1: LPI2C adapter registered
[    2.375837] i2c 2-0050: Fixed dependency cycle(s) with /soc@0/usb@4c100000/port/endpoint
[    2.384779] i2c 2-0051: Fixed dependency cycle(s) with /soc@0/usb@4c200000/port/endpoint
[    2.393669] adp5585 2-0034: Failed to read reg 0x00, ret is -5
[    2.399530] adp5585: probe of 2-0034 failed with error -5
[    2.405094] i2c 2-003c: Fixed dependency cycle(s) with /soc@0/bus@42800000/camera/csi@4ae00000/port/endpoint
[    2.415194] i2c i2c-2: LPI2C adapter registered
[    2.421529] 42590000.serial: ttyLP4 at MMIO 0x42590010 (irq = 106, base_baud = 1500000) is a FSL_LPUART
[    2.431054] serial serial0: tty port ttyLP4 registered
[    2.437327] imx-drm display-subsystem: bound imx-lcdifv3-crtc.0 (ops lcdifv3_crtc_ops)
[    2.445288] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/dsi@4ae10000 to encoder DSI-34: -19
[    2.455290] dw-mipi-dsi-imx 4ae10000.dsi: [drm:dw_mipi_dsi_imx_bind] *ERROR* failed to attach bridge: -19
[    2.464849] imx-drm display-subsystem: failed to bind 4ae10000.dsi (ops dw_mipi_dsi_imx_ops): -19
[    2.473921] imx-drm display-subsystem: adev bind failed: -19
[    2.479592] dw-mipi-dsi-imx 4ae10000.dsi: [drm:dw_mipi_dsi_imx_probe] *ERROR* failed to register component: -19
[    2.502062] dwc-mipi-csi2-host 4ae00000.csi: lanes: 2, name: mxc-mipi-csi2.0
[    2.502098] sdhci-esdhc-imx 42860000.mmc: Got CD GPIO
[    2.516681] OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/tcpc@50/connector
[    2.525438] OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/tcpc@50/connector
[    2.534180] OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/tcpc@50/connector
[    2.536844] nxp-pca9450 1-0025: PWRON interrupt.
[    2.547490] nxp-pca9450 1-0025: WDOGB interrupt.
[    2.552108] nxp-pca9450 1-0025: LOWVSYS interrupt.
[    2.557040] nxp-pca9450 1-0025: pca9451a probed.
[    2.557297] mmc1: SDHCI controller on 42860000.mmc [42860000.mmc] using ADMA
[    2.573128] OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/tcpc@51/connector
[    2.581855] OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/tcpc@51/connector
[    2.590557] OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/tcpc@51/connector
[    2.606897] sdhci-esdhc-imx 428b0000.mmc: allocated mmc-pwrseq
[    2.614584] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.623643] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.629406] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.632756] clk: Disabling unused clocks
[    2.638026] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[    2.642538] ALSA device list:
[    2.652640]   No soundcards found.
[    2.680536] mmc2: SDHCI controller on 428b0000.mmc [428b0000.mmc] using ADMA
[    2.687877] Waiting for root device /dev/mmcblk1p2...
[    2.762114] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    2.794174] mmc1: host does not support reading read-only switch, assuming write-enable
[    2.808579] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
[    2.815581] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
[    2.825196]  mmcblk1: p1 p2
[    2.851601] EXT4-fs (mmcblk1p2): recovery complete
[    2.857953] EXT4-fs (mmcblk1p2): mounted filesystem 436aa69d-b436-4ea1-af36-547c1218a920 r/w with ordered data mode. Quota mode: none.
[    2.870094] VFS: Mounted root (ext4 filesystem) on device 179:98.
[    2.879200] devtmpfs: mounted
[    2.883267] Freeing unused kernel memory: 3904K
[    2.887935] Run /sbin/init as init process
[    2.892027]   with arguments:
[    2.892030]     /sbin/init
[    2.892032]   with environment:
[    2.892034]     HOME=/
[    2.892036]     TERM=linux
[    3.215174] udevd[136]: starting version 3.2.14
[    3.240227] udevd[137]: starting eudev-3.2.14
[    3.564882] EXT4-fs (mmcblk1p2): re-mounted 436aa69d-b436-4ea1-af36-547c1218a920 r/w. Quota mode: none.
[    3.952711] RTL8211F-VD Gigabit Ethernet 42890000.ethernet-1:02: attached PHY driver (mii_bus:phy_addr=42890000.ethernet-1:02, irq=POLL)
[   12.677564] platform sound-bt-sco: deferred probe pending
[   12.682993] i2c 2-003c: deferred probe pending
[   12.687434] platform regulator-dvdd_sel: deferred probe pending
[   12.693343] platform regulator-dvdd: deferred probe pending
[   12.698907] platform regulator-vdd: deferred probe pending
[   12.704384] platform regulator-vddo: deferred probe pending
[   12.709952] platform regulator-vaa_sel: deferred probe pending
[   12.715772] platform regulator-avdd: deferred probe pending

The SD card is correctly detected:

root@imx93-11x11-lpddr4x-evk:~# dmesg | grep mmc
[    0.000000] Kernel command line: console=ttyLP0,115200 earlycon root=/dev/mmcblk1p2 rootwait rw
[    1.306123] mmc0: SDHCI controller on 42850000.mmc [42850000.mmc] using ADMA
[    1.377658] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    1.384515] mmcblk0: mmc0:0001 DA6016 14.7 GiB
[    1.390063]  mmcblk0: p1 p2
[    1.400751] mmcblk0boot0: mmc0:0001 DA6016 4.00 MiB
[    1.412664] mmcblk0boot1: mmc0:0001 DA6016 4.00 MiB
[    1.421955] mmcblk0rpmb: mmc0:0001 DA6016 4.00 MiB, chardev (234:0)
[    2.502098] sdhci-esdhc-imx 42860000.mmc: Got CD GPIO
[    2.557297] mmc1: SDHCI controller on 42860000.mmc [42860000.mmc] using ADMA
[    2.606897] sdhci-esdhc-imx 428b0000.mmc: allocated mmc-pwrseq
[    2.680536] mmc2: SDHCI controller on 428b0000.mmc [428b0000.mmc] using ADMA
[    2.687877] Waiting for root device /dev/mmcblk1p2...
[    2.762114] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    2.794174] mmc1: host does not support reading read-only switch, assuming write-enable
[    2.808579] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
[    2.815581] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
[    2.825196]  mmcblk1: p1 p2
[    2.851601] EXT4-fs (mmcblk1p2): recovery complete
[    2.857953] EXT4-fs (mmcblk1p2): mounted filesystem 436aa69d-b436-4ea1-af36-547c1218a920 r/w with ordered data mode. Quota mode: none.
[    3.564882] EXT4-fs (mmcblk1p2): re-mounted 436aa69d-b436-4ea1-af36-547c1218a920 r/w. Quota mode: none.

Does the SD card get detected for you when using 6.6.28?

Thanks

from meta-freescale.

fabioestevam avatar fabioestevam commented on July 18, 2024

Hi @MrCry0 and @otavio

I fixed the boot issue and submitted a pull request:

Freescale/linux-fslc@e9ea6ba

from meta-freescale.

fabioestevam avatar fabioestevam commented on July 18, 2024

Closing this issue as I sent a fix for this problem.

from meta-freescale.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.