Threaded hole not working in Part Design about freecad-bundle HOT 6 CLOSED

You can not create a Hole from Pad in any version of Freecad.
You must select a face, create a new sketch, draw a circle, position the circle, close the sketch.
Select this sketch and make what hole you desired.

from freecad-bundle.

My apologies, I think a lack of sleep has muddled my brain. A problem exists, however. I have updated the original post with the correct steps to show the problem. Basically, the hole shows up but not the threads, and an error is generated.

from freecad-bundle.

No problem. You’re welcome.
Also, I am new in Freecad, I learn every day something new.
Let me have a look at this problem.
My gratitude goes to this marvelous community around the globe, that work very hard to make this wonderful software and keep it free.

from freecad-bundle.

A clue: I discovered that if I modify the hole to pass completely through the cube (by adjusting the depth or selecting Through all) the problem goes away.

As a side note, selecting Through all sets the hole depth to 139.95 mm for some reason, even though the cube is only 40 mm thick.

from freecad-bundle.

Another clue: It seems that the problem also disappears when I set the hole's Refine value to false.

from freecad-bundle.

Is this still an issue in the latest weekly?
If so please create an issue (if there is not already an existing one) here https://github.com/FreeCAD/FreeCAD/issues

from freecad-bundle.