MAG Z590 TORPEDO about nct6687d HOT 4 OPEN

Same board, same problem with Mint 20.3 and kernel 5.14.0-1036.
I made a correction file for it: /etc/sensors.d/Z590.conf

chip "nct6687-isa-0a20"
  compute in1 @/1.4, @*1.4

Now it reports 4,95 volt. But would be nice if it gets fixed!

from nct6687d.

Hello, by reading label in sensors output it look like that the module used to report voltage & fan speed is not mine also the label "in1" used in the /etc/sensors.d/Z590.conf is not a label used in my module.

Regards

from nct6687d.

You can check like this:
compute in1 @ * 0.72 , @ / 0.72

from nct6687d.

Hello, by reading label in sensors output it look like that the module used to report voltage & fan speed is not mine also the label "in1" used in the /etc/sensors.d/Z590.conf is not a label used in my module.

Regards

We have the same board and installed the same module! So no difference here.. Sensors gives you the label and not the filename that reports the 5volt.
Go to /sys/class/hwmon/hwmon(x)/ and check which of the *_input files gives the faulty 5 volt. On my system that's in1_input. You can check the label name in *_label
On your system it is probably also in1. If so, you can copy the Z590.conf if not you can even so copy the file and change the in1 to whatever file reports the faulty 5 volt on your system. But my bet is on in1! ;)

from nct6687d.