I would like to know if someone has tested rpidatv in the Raspberry Pi Zero, does the program work in it ? about rpidatv HOT 9 CLOSED

It should work, have to set up again my raspi zero to confirm !

2016-08-18 0:16 GMT+02:00 csarmo [email protected]:

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
#31, or mute the thread
https://github.com/notifications/unsubscribe-auth/AF53RnK8CNH2svipKMso2Fi-KHc3AfaBks5qg4gzgaJpZM4Jm8eQ
.

from rpidatv.

Hi Evariste i check the master code but on Rpi Zero don't work . Waiting your feedback :)

from rpidatv.

I have tried loading rpiDATV onto raspi zero and it works !
Note : I have only tried DATV transmitter part (RF) with last raspi cam

from rpidatv.

What OS / Kernel rev are you using in your test ? On what pin you put the antenna ?
best
Roberto

from rpidatv.

This is my result of uname -a
Linux raspberrypi 4.4.17+ #904 Tue Aug 16 16:58:22 BST 2016 armv6l GNU/Linux
The pin is connected in the same place where connected the RPI 2 .

from rpidatv.

Here is mine : Linux NanoPi 4.4.15+ #897 Tue Jul 12 18:38:58 BST 2016 armv6l GNU/Linux
"RF" pin same as RPI2
Christian

from rpidatv.

Hi Christian ,
on what Frequency ? Can you share the raw of your sd ... That could be good for understand what is the difference. And for have a good starting point now with last update i'm now at 4.4.18 .
I'm testing some Evariste patch but now the problem still ... Evariste is great developer so i know that is solve it :) But other support in testing could help ... :)

from rpidatv.

Today finish the test with Evariste , now it work on RPI 0 , too
Great Job !!! I think that the new revision will be release in the next days :)
https://www.youtube.com/watch?v=PgLi_ZMqI-c
_

from rpidatv.

Work with all raspberry pi, but need at least Jessie...

from rpidatv.