Picture courtesy of Wackalope#6737

• EyeTrackVR - This project is in development and is not fully finished
  • Hardware
  • About IR Emitter Safety - Make sure you are using NON-focused emitters and at around 5ma total power
  • Firmware
  • Headset support
    • Contact
• Licenses

Open source and affordable VR eye tracker platform for VRChat via OSC and UDP protocol.

Note: This project is in development and is not fully finished

Please check out our documentation site.

3d files for mounting brackets will be found here IR emitter files are also located there. For more info please reference our documentation site

Current work has been with our official firmware by lorow, found here.

Any headset that can fit the camera and LEDs can likely be supported, however, mounts may not have been made for it. Please reference to our parts list for details.

Please exercise extreme caution when messing around with IR emitters. Once safety testing has been completed links and files will be provided for the emitters. Please make sure you know what you are doing when assembling the IR emitters. DO NOT BYPASS (OR NOT DO) ANY SAFETY FEATURES PUT IN PLACE. This can result in irreversible bodily harm. The safety measures were put in place to REDUCE the potential failure risk. All further safety responsibilities are on the user. This includes visually checking with an IR camera that the brightness is correct and making sure you do not feel warmth.

Warning: Make sure you are using NON-focused emitters and at power less than 8mW cm^2 total per eye. Please read our LED safety page for a breakdown of math for out V3 and V4 LED kits here

Effect of infrared radiation on the lens

Training-library Nir Stds

AN002_Details on photobiological safety of LED light sources

Please join our Discord for updates and any questions.

All software is under the MIT License. All documentation, including the Wiki, is under the Creative Commons CC-BY-SA-4.0 license.

Top