Blinds HOMEKIT (servo or stepper motors) about esp-homekit-sdk HOT 7 OPEN

@exrector , I am not sure if I understand the exact issue here.

• Is this just a problem of merging https://github.com/espressif/esp-iot-solution/tree/master/components/motor/servo into https://github.com/espressif/esp-rainmaker/tree/master/examples/homekit_switch?
• Do you have both of these working fine independently?
• Have you been able to create atleast a dummy HomeKit service for your requirement without the hardware integration? The "Window Covering" is the service you might be looking for. Have you checked that in the HomeKit specifications? It can also be emulated using this HomeKit Emulator example.

from esp-homekit-sdk.

Hello! @shahpiyushv Thank you for responding

1. Project https://github.com/espressif/esp-rainmaker/tree/master/examples/homekit_switch it works well.

2.https://github.com/espressif/esp-iot-solution
Cloning to "/ Users / exrector / esp-iot-solution / components / hmi / ugfx_gui / ugfx" ...
fatal: "https://git.ugfx.io/ugfx/ugfx.git/" not available: Failed to connect to git.ugfx.io port 443: Connection refused
fatal: failed to clone "https://git.ugfx.io/ugfx/ugfx.git" into a submodule under the path "/ Users / exrector / esp-iot-solution / components / hmi / ugfx_gui / ugfx"
Failed to clone 'components / hmi / ugfx_gui / ugfx' on second try, cancel

3.https://github.com/espressif/esp-iot-solution/tree/master/components/motor/servo/servo_motor
Too old project
CMake Error at CMakeLists.txt: 20 (register_component):
Unknown CMake command "register_component".
CMake Warning (dev) in CMakeLists.txt:
No cmake_minimum_required command is present. A line of code such as
cmake_minimum_required (VERSION 3.18)
should be added at the top of the file. The version specified may be lower
if you wish to support older CMake versions for this project. For more
information run "cmake --help-policy CMP0000".
This warning is for project developers. Use -Wno-dev to suppress it.

4.https://github.com/espressif/esp-homekit-sdk/tree/master/examples/emulator
No way to check, we have a bug now espressif/esp-idf#5962 (comment)

5.https://github.com/maximkulkin/esp-homekit-demo/tree/master/examples/blinds
instruction https://github.com/maximkulkin/esp-homekit-demo/wiki/Build-instructions-ESP32
I would like to use this example, but I cannot put it together into a project.

from esp-homekit-sdk.

Hello @shahpiyushv
Please add a working example of blinds

from esp-homekit-sdk.

@exrector I've just started working on a project for that, it's very early stages and not a minimal example, but I do have Homekit successfully reading/writing to a stepper motor connected to an ESP32 with this SDK (slightly modified)

Project is here: https://github.com/maxakuru/WBlinds
The motor and Homekit aren't coupled, but Homekit integration is here, and A4988 stepper driver controller is here (uses FastAccelStepper)

also, thanks for the SDK @shahpiyushv & espressif team!

from esp-homekit-sdk.

> @exrector I've just started working on a project for that, it's very early stages and not a minimal example, but I do have Homekit successfully reading/writing to a stepper motor connected to an ESP32 with this SDK (slightly modified)
> 
> Project is here: https://github.com/maxakuru/WBlinds The motor and Homekit aren't coupled, but Homekit integration is [here](https://github.com/maxakuru/WBlinds/blob/main/src/homekit.cpp), and A4988 stepper driver controller is [here](https://github.com/maxakuru/WBlinds/blob/main/src/motor_a4988.cpp) (uses [FastAccelStepper](https://github.com/gin66/FastAccelStepper))
> 
> also, thanks for the SDK @shahpiyushv & espressif team!

waiting for the integration all with homekit... there is no project working ok online :(

from esp-homekit-sdk.

> @exrector I've just started working on a project for that, it's very early stages and not a minimal example, but I do have Homekit successfully reading/writing to a stepper motor connected to an ESP32 with this SDK (slightly modified)
> 
> Project is here: https://github.com/maxakuru/WBlinds The motor and Homekit aren't coupled, but Homekit integration is [here](https://github.com/maxakuru/WBlinds/blob/main/src/homekit.cpp), and A4988 stepper driver controller is [here](https://github.com/maxakuru/WBlinds/blob/main/src/motor_a4988.cpp) (uses [FastAccelStepper](https://github.com/gin66/FastAccelStepper))
> 
> also, thanks for the SDK @shahpiyushv & espressif team!

waiting for the integration all with homekit... there is no project working ok online :(

is there anything new?

from esp-homekit-sdk.

only can make works with HAA from:

https://github.com/RavenSystem/

from esp-homekit-sdk.