Comments (1)
With the latest code on the v5.4-ath10k-sdio branch, the kernel crashes when card is inserted:
[ 99.741596] mmc0: cannot verify signal voltage switch
[ 99.855667] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
[ 99.871504] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
[ 99.878666] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
[ 99.880082] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
[ 99.887757] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
[ 99.887821] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
[ 99.887885] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
[ 99.887908] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 99.958992] ath10k_sdio mmc0:0001:1: WARNING: ath10k SDIO support is work-in-progress, problems may arise!
[ 100.000502] ath10k_sdio mmc0:0001:1: qca9377 hw1.1 sdio target 0x05020001 chip_id 0x00000000 sub 0000:0000
[ 100.000504] ath10k_sdio mmc0:0001:1: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 100.000822] ath10k_sdio mmc0:0001:1: firmware ver WLAN.TF.1.1.1-00061-QCATFSWPZ-1 api 5 features ignore-otp crc32 7746e551
[ 100.152134] ath10k_sdio mmc0:0001:1: board_file api 2 bmi_id N/A crc32 0708e68d
[ 101.289053] ath10k_sdio mmc0:0001:1: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 101.289349] BUG: unable to handle page fault for address: fffff632300094c8
[ 101.289351] #PF: supervisor read access in kernel mode
[ 101.289352] #PF: error_code(0x0000) - not-present page
[ 101.289352] PGD 0 P4D 0
[ 101.289354] Oops: 0000 [#1] SMP PTI
[ 101.289356] CPU: 1 PID: 147 Comm: kworker/1:2 Not tainted 5.4.0+ #1
[ 101.289357] Hardware name: Dell Inc. Latitude 7480/00F6D3, BIOS 1.6.4 08/29/2017
[ 101.289361] Workqueue: events sd_request [rtsx_pci_sdmmc]
[ 101.289364] RIP: 0010:sg_miter_stop+0x5a/0x80
[ 101.289366] Code: a8 a0 12 00 00 01 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 48 c7 47 10 00 00 00 00 48 c7 47 18 00 00 00 00 5d c3 48 8b 17 <48> 8b 4a 08 48 8d 71 ff 8 3 e1 01 48 0f 45 d6 a8 01 48 8b 12 74 c6
[ 101.289367] RSP: 0018:ffffb2f7c03b7d60 EFLAGS: 00010202
[ 101.289368] RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000
[ 101.289368] RDX: fffff632300094c0 RSI: ffff88fe329d8284 RDI: ffffb2f7c03b7d78
[ 101.289369] RBP: ffffb2f7c03b7d60 R08: ffffb2f7c03b7d78 R09: 0000000000000dec
[ 101.289370] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[ 101.289370] R13: 0000000000000004 R14: 0000000000000004 R15: 0000000000000000
[ 101.289371] FS: 0000000000000000(0000) GS:ffff88fe36280000(0000) knlGS:0000000000000000
[ 101.289372] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.289373] CR2: fffff632300094c8 CR3: 0000000026e0a003 CR4: 00000000003606e0
[ 101.289374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 101.289374] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 101.289375] Call Trace:
[ 101.289377] sg_copy_buffer+0xc9/0xf0
[ 101.289379] sg_copy_from_buffer+0xf/0x20
[ 101.289380] sd_request+0x568/0xa7a [rtsx_pci_sdmmc]
[ 101.289383] ? __switch_to_asm+0x40/0x70
[ 101.289384] ? __switch_to_asm+0x34/0x70
[ 101.289386] process_one_work+0x20f/0x400
[ 101.289388] worker_thread+0x34/0x410
[ 101.289389] kthread+0x121/0x140
[ 101.289390] ? process_one_work+0x400/0x400
[ 101.289392] ? kthread_park+0x90/0x90
[ 101.289393] ret_from_fork+0x35/0x40
[ 101.289394] Modules linked in: ath10k_sdio ath10k_core ath mac80211 libarc4 mmc_block bnep x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi kvm uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common crct10dif_pclmul videodev crc32_pclmul ghash_clmulni_intel snd_hda_codec_realtek dell_rbtn mc snd_hda_codec_generic aesni_intel hid_multitouch dell_laptop snd_hda_intel btusb ledtrig_audio snd_intel_nhlt crypto_simd snd_hda_codec btrtl iwlwifi cryptd dell_smm_hwmon btbcm mei_hdcp snd_hda_core btintel snd_hwdep bluetooth glue_helper cfg80211 mei_wdt intel_rapl_msr intel_cstate rtsx_pci_ms snd_pcm ecdh_generic memstick ecc intel_rapl_perf mei_me processor_thermal_device intel_xhci_usb_role_switch iTCO_wdt mei snd_timer iTCO_vendor_support snd roles soundcore int3403_thermal intel_rapl_common input_leds int3400_thermal intel_soc_dts_iosf acpi_thermal_rel dell_wmi joydev serio_raw intel_hid evbug int340x_thermal_zone intel_pch_thermal dell_smbios
[ 101.289413] dcdbas mac_hid intel_wmi_thunderbolt wmi_bmof acpi_pad sparse_keymap dell_wmi_descriptor pcspkr parport_pc ppdev lp parport ip_tables x_tables autofs4 usbhid uas usb_storage hid_alps hid_generic i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops rtsx_pci_sdmmc e1000e i2c_i801 drm ahci rtsx_pci libahci intel_lpss_pci i2c_hid wmi hid intel_lpss_acpi intel_lpss idma64 video virt_dma
[ 101.289425] CR2: fffff632300094c8
[ 101.289426] ---[ end trace d824e962b6c35938 ]---
[ 101.289428] RIP: 0010:sg_miter_stop+0x5a/0x80
[ 101.289429] Code: a8 a0 12 00 00 01 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 48 c7 47 10 00 00 00 00 48 c7 47 18 00 00 00 00 5d c3 48 8b 17 <48> 8b 4a 08 48 8d 71 ff 83 e1 01 48 0f 45 d6 a8 01 48 8b 12 74 c6
[ 101.289430] RSP: 0018:ffffb2f7c03b7d60 EFLAGS: 00010202
[ 101.289431] RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000
[ 101.289431] RDX: fffff632300094c0 RSI: ffff88fe329d8284 RDI: ffffb2f7c03b7d78
[ 101.289432] RBP: ffffb2f7c03b7d60 R08: ffffb2f7c03b7d78 R09: 0000000000000dec
[ 101.289432] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[ 101.289433] R13: 0000000000000004 R14: 0000000000000004 R15: 0000000000000000
[ 101.289434] FS: 0000000000000000(0000) GS:ffff88fe36280000(0000) knlGS:0000000000000000
[ 101.289435] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.289435] CR2: fffff632300094c8 CR3: 0000000026e0a003 CR4: 00000000003606e0
[ 101.289436] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 101.289437] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
from linux-ath.
Related Issues (17)
- Received tx completion for invalid msdu_id: 0 HOT 3
- Porting to Linux version 4.4.8 HOT 1
- 5G band cannot work. HOT 3
- Yealink WF50 gives ‘Unsupported hardware version: 0x5020001’ HOT 7
- Silex SX-SDMAC SDIO on iMX6 platform issues with mmc interrupt timeouts HOT 1
- Backport to 4.14 HOT 16
- SDIO Device tree documentation HOT 1
- sdio changes on v4.19-ath10k-sdio
- Spectral Scan HOT 1
- QCA9377 SDIO Validation HOT 3
- Please list modifications HOT 3
- DeviceTree documentation update HOT 2
- Error when bringing interface up HOT 1
- MPDU range status: 10
- lockdep_assert_held() failing
- sdio changes for 4.16? HOT 11
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from linux-ath.