Help getting NUC123 in bootloader mode about nu-isp-rs HOT 3 OPEN

Might be a bit late, but I get my Ducky One 2 Mini RGB (dkon2061st) into bootloader (ISP mode) by holding D while I plug in the USB cable. You know it's in bootloader mode since the backlight isn't running and the keys aren't working.

from nu-isp-rs.

nu-isp-cli is designed with no specific hardware in mind. so technically this issue is off-topic.

0416:0123 is the VID:PID pair for when Ducky One2Mini is functioning as a keyboard. specifying that in the command-line is clearly wrong operation. nu-isp-cli do not come with means to put devices into boot-loader mode.

You have to manually put your keyboard in to boot-loader mode somehow.
The instruction says:

For the 1861ST to flash you can boot the keyboard while holding D+L.

Here "boot" is referring to the action powering your keyboard, in other words the action connecting a USB cable to it.

Then your keyboard in boot-loader mode should show up as 0416:3F00 .

In case of Linux like system, be aware of permissions of the device file. that is, take care of udev rules OR run with root privilege.

from nu-isp-rs.

Thanks for the response.

I've already added the relevant udev rules like specified in the readme, and the only thing I seem to be missing is getting the board into bootloader mode.

from nu-isp-rs.